|
[China]
Trade Verify
Address: Room 1409, 1st Building, Xiaocheng Tiandi Commercial Center, Qiantang New District, Hangzhou City, Zhejiang Province, China
Contact name:Connie
Hangzhou Fuda Dehumidification Equipment Co., Ltd. |
|
Verified Suppliers
|
|
|
3000m3/h Small Hot Sale High Efficiency Desiccant Dehumidifier Industrial Air Dryer
ZCS Series Desiccant Dehumidifier is used to remove water vapor from air thereby lowering the humidity of the air. It helps you to control the humidity in certain place by the dehumidification of a desiccant rotor.
| Model | ZCS-3000 |
| Process Airflow(m3/h) | 3000 |
| Reactivation Airflow(m3/h) | 1000 |
| Rated Dehumidification Capacity(kg/h) | 23.8 |
| Reactivation Heating Power(kw) | 21 |
| Process Fan Power(kw) | 2.2 |
| Reactivation Fan Power(kw) | 1.1 |
| Driving Motor Power(kw) | 0.09 |
| Installed Power(kw) | 24.39 |
| Overall Dimension(mm) | 2600*940*1590 |
| Weight (kg) | 550 |
| Power Supply | 380V/3P/50Hz |
Supply Air Stream
Outside air is drawn into the unit using the supply fan. The warm, moist outside air first passes through filters and then the cooling coil where it is cooled. The air then goes through the desiccant wheel where the air is dehumidified and the temperature is raised. At last the air is delivered directly to the space or into an existing air handler.
Exhaust Air Stream
Exhaust air is used to provide energy recovery for the desiccant wheel and is drawn into the unit using the exhaust fan. The air filtered and then heated and humidified during the energy recovery process. The air is then heated while passing through the regeneration coil. The heated air removes the moisture that the desiccant wheel adsorbs from the process air stream.
