Home Companies Yueqing Richuang Automation Equipment Co.,Ltd

Siemens CPU Industrial Automation Products Central Processing Unit 6ES7417-4XT05-0AB0

Contact Us

[China]

Trade Verify

Address: Liushi Town,Yueqing City,Zhejiang Province,China

Contact name:

Yueqing Richuang Automation Equipment Co.,Ltd

Verified Suppliers

Trust
Seal
Verified
Supplier
Credit
Check
Capability
Assessment

Siemens CPU Industrial Automation Products Central Processing Unit 6ES7417-4XT05-0AB0

Country/Region	china
City & Province	zhejiang
Categories	Chargers

Product Details

Siemens CPU 6ES7417-4XT05-0AB0 S7-400 Central Processing Unit Industrial Automation Products

Overview

The most powerful SIMATIC S7-400 CPU
Can be used in the most sophisticated installations in the upper performance range
With two slots for IF modules

Application

The CPU 417-4 is the most powerful SIMATIC S7-400 CPU. The integral PROFIBUS DP interfaces permit direct connection to the PROFIBUS DP fieldbus as master or slave.

Two further DP master systems can be connected via the IF 964-DP interface submodules.

Note:
Only the interface module 6ES7 964-2AA04-0AB0 can be used.

Function

Block protection:
a password concept also protects the user program from unauthorized access
Integrated HMI services:
The user only has to specify the source and destination of the data with HMI devices. The data are then transported cyclically and automatically by the system.
Integrated communication functions:
- PG/OP communication
- Global data communication
- S7 standard communication
- S7 communication

Technical specifications

Article number		6ES7417-4XT07-0AB0
		CPU 417-4, 32 MB, 4 INTERFACES
General information
Product type designation		CPU 417-4
HW functional status		01
Firmware version		V7.0
Engineering with
● Programming package		STEP 7 V5.4 or higher with HSP 261
CiR – Configuration in RUN
CiR synchronization time, basic load		60 ms
CiR synchronization time, time per I/O byte		7 µs
Supply voltage
Rated value (DC)
● 24 V DC		No; Power supply via system power supply
Input current
from backplane bus 5 V DC, typ.		1.3 A
from backplane bus 5 V DC, max.		1.6 A
from backplane bus 24 V DC, max.		600 mA; 150 mA per DP interface
from interface 5 V DC, max.		90 mA; At each DP interface
Power loss
Power loss, typ.		6.5 W
Power loss, max.		8 W
Memory
Type of memory		RAM
Work memory
● integrated		32 Mbyte
● integrated (for program)		16 Mbyte
● integrated (for data)		16 Mbyte
● expandable		No
Load memory
● expandable FEPROM		Yes; with Memory Card (FLASH)
● expandable FEPROM, max.		64 Mbyte
● integrated RAM, max.		1 Mbyte
● expandable RAM		Yes; with Memory Card (RAM)
● expandable RAM, max.		64 Mbyte
Backup
● present		Yes
● with battery		Yes; all data
● without battery		No
Battery
Backup battery
● Backup current, typ.		225 µA; up to 40 °C
● Backup current, max.		1 275 µA
● Backup time, max.		See reference manual, module data, Chapter 3.3
● Feeding of external backup voltage to CPU		5 V DC to 15 V DC
CPU processing times
for bit operations, typ.		7.5 ns
for word operations, typ.		7.5 ns
for fixed point arithmetic, typ.		7.5 ns
for floating point arithmetic, typ.		15 ns
CPU-blocks
DB
● Number, max.		16 000; Number range: 1 to 16000
● Size, max.		64 kbyte
FB
● Number, max.		8 000; Number range: 0 to 7999
● Size, max.		64 kbyte
FC
● Number, max.		8 000; Number range: 0 to 7999
● Size, max.		64 kbyte
OB
● Number, max.		see instruction list
● Size, max.		64 kbyte
● Number of free cycle OBs		1; OB 1
● Number of time alarm OBs		8; OB 10-17
● Number of delay alarm OBs		4; OB 20-23
● Number of cyclic interrupt OBs		9; OB 30-38 (shortest cycle that can be set = 500 µs)
● Number of process alarm OBs		8; OB 40-47
● Number of DPV1 alarm OBs		3; OB 55-57
● Number of isochronous mode OBs		4; OB 61-64
● Number of multicomputing OBs		1; OB 60
● Number of background OBs		1; OB 90
● Number of startup OBs		3; OB 100-102
● Number of asynchronous error OBs		9; OB 80-88
● Number of synchronous error OBs		2; OB 121, 122
Nesting depth
● per priority class		24
● additional within an error OB		2
Counters, timers and their retentivity
S7 counter
● Number		2 048
Retentivity
— adjustable		Yes
— lower limit		0
— upper limit		2 047
— preset		Z 0 to Z 7
Counting range
— lower limit		0
— upper limit		999
IEC counter
● Number		Unlimited (limited only by RAM capacity)
S7 times
● Number		2 048
Retentivity
— adjustable		Yes
— lower limit		0
— upper limit		2 047
— preset		No times retentive
Time range
— lower limit		10 ms
— upper limit		9 990 s
IEC timer
● present		Yes
● Type		SFB
● Number		Unlimited (limited only by RAM capacity)
Data areas and their retentivity
retentive data area in total		Total working and load memory (with backup battery)
Flag
● Number, max.		16 kbyte; Size of bit memory address area
● Retentivity available		Yes
● Retentivity preset		MB 0 to MB 15
● Number of clock memories		8; in 1 memory byte
Local data
● adjustable, max.		64 kbyte
● preset		32 kbyte
Address area
I/O address area
● Inputs		16 kbyte
● Outputs		16 kbyte
of which distributed
— MPI/DP interface, inputs		2 kbyte
— MPI/DP interface, outputs		2 kbyte
— DP interface, inputs		8 kbyte
— DP interface, outputs		8 kbyte
Process image
● Inputs, adjustable		16 kbyte
● Outputs, adjustable		16 kbyte
● Inputs, default		1 024 byte
● Outputs, default		1 024 byte
● consistent data, max.		244 byte
● Access to consistent data in process image		Yes

Service Range:

we also do SIEMENS S7-400 PLC,SIEMENS S7-1200 PLC, SIEMENS S7-200 SIEMENS PLC, SIEMENS S7-300, SIEMENS S7-400, SIEMENS ET200, SIEMENS HMI, SIEMENS TOUCH PANEL, SIEMENS TDC, SIEMENS 6ES5, SIEMENS 6ES7, SIEMENS 6DD, SIEMENS controller, SIEMENS CNC
S5-100U,115U,155U PLCs
SIMATIC S7-200,SIMATIC S7-300,SIMATIC S7-400
SIEMENS LOGO ,SIEMENS PG,SIMATIC HMI, SIEMENS Wincc
SIEMENS ET200M,SIEMENS ET200S,SIEMENS Profibus
MicroMaster 420, MicroMaster 430, MicroMaster 440 ,SIEMENS VFD
,SIEMENS SINAMICS,,SIEMENS G110,SIEMENS G120, SIEMENS drive

Warranty

1.All goods has 365days warranty.

2.Our warehouse always double check all the products before shipping to make sure correct.
3.All parts we sell has 30 days return policy from the day of shipment, but if the damage is man-made,we will be unable to change for you.