60KW Ultra High Frequency Induction Heating Machine For Surface Hardening

Brief introduction of ultra high frequency induction heating machines:

Our ultra high frequency induction heating machines adopt IGBT series and parallel induction heating technology as the core. Heat the workpiece to a certain temperature within a second, and then cool it rapidly to harden the surface within an extreme thin thicklness.without changing inner machanic structures.

Technical parameters of the 60KW Ultra High Frequency Induction Heating Machine:

Advantages of ultra high frequency Induction Heating machines:

1. Fast heating: the minimum rate of heating is less than 1 second (rate of heating is able to adjust and control).

2. Wide range of heating: it can be used to heat metal parts of different shapes(replace removable induction coil as per different operating).

3. Easy installation: it can be used once it is connected with power source, induction coil as well as water supply pipes and rising pipes; it is small in size and light in weight.

4. Easy operation: you can learn to operate it within several minutes.

5. Fast start-up: it can be started to perform heating operation on condition that water and power supply is available.

6. Low power consumption: As compared with conventional vacuum tube high frequency equipments, it can save the power by approximately 70%. The smaller the size of the work piece is, the lower power consumption would be.

7. High effectiveness: it has such features as uniform heating (it is applicable to adjust the space of the induction coil to ensure the appropriate temperature as required by each part of work piece), fast warming and limited oxic horizon, and can guard against any waste after annealing.

8. Comprehensive protection: it has functions as overpressure, over-current, overheat and water shortage alarm indications as well as automatic control and protection.

9. Controllable temperature: it is applicable to control the temperature for heating work pieces as per the preset heating time, and thereby control the heating temperature at a certain technical point.

10. Comprehensive full load design: it can work continuously for 24 hours.

11. Small size and light weight: it has a weight of only several dozens of kilograms, of which, the limited floor space can effectively save the workshop space.

12. Elimination of high voltage: it requires no step-up transformer which may produce approximately ten thousand voltage, and thus can ensure the maximum safety.

Applications of heating machines: