Home Companies 3onedata Co., Ltd.

IES3000 Managed Bypass Industrial Ethernet Switch

Active Member

Contact Us

[China]

Address: 3/B, Zone 1, Baiwangxin High Technology Industrial park,Song Bai Road, Nanshan District, Shenzhen, 518108, China

Contact name:Vanessa

3onedata Co., Ltd.

IES3000 Managed Bypass Industrial Ethernet Switch

Country/Region	china
City & Province	shenzhen guangdong

Product Details

12-port Full Gigabit Managed Bypass Industrial Ethernet Switch

Introduction:

IES3000 series is industrial 12-port full gigabit managed Bypass Ethernet switch. This product provides gigabit copper port (optional PoE), gigabit SFP slot and 2 Bypass. It adopts rack mounting to meet the requirements of different application scenes.

Network management system supports various network protocols and industrial standards, such as ERPS, STP/RSTP/MSTP ring network protocol, 802.1Q VLAN, QoS, IGMP Static Multicast, LLDP, Port Trunking, Port Mirroring, IPv6 Management, etc. It also possesses complete management functions, including Port Configuration, Port Statistics, Access Control, 802.1X Authentication, Network Diagnosis, Rapid Configuration, Online Upgrading and so on, and supports CLI, WEB, Telnet, SNMP and other access methods. It can provide users with good experience with friendly design of network management system interface, simple and convenient operation.

There are two independent power supply circuits inside the device, which can ensure that it can operate normally when one fails. DIP switch can achieve restoring factory defaults setting. When power supply or port has link failure, ALARM indicator will be bright and send out alarm, meanwhile, alarm device connected to the relay will send out alarm for rapid scene troubleshooting. Hardware adopts fanless, low power consumption, wide temperature and voltage design and has passed rigorous industrial standard tests, which can suit for the industrial scene environment with harsh requirements for EMC. It can be widely used in smart grid, rail transit, smart city, safe city, new energy, aerospace, intelligent manufacturing, military project and other industrial fields.

Specification:

Standard

Protocol

IEEE 802.3 for 10Base-T

IEEE 802.3u for 100Base-TX

IEEE 802.3ab for 1000Base-T

IEEE 802.3z for 1000Base-X

G.8032 Standard for ERPS

IEEE 802.3x for Flow Control

IEEE 802.1D for Spanning Tree Protocol

IEEE 802.1w for Rapid Spanning Tree Protocol

IEEE 802.1s for Multiple Spanning Tree Protocol

IEEE 802.1Q for VLAN

IEEE 802.1p for Class of Service

IEEE 802.1X for 802.1X authentication

IEEE 802.1AB for LLDP

IEEE 802.3ad for LACP

IEEE 802.3af for PoE

IEEE 802.3at for PoE+

Management

SNMP v1/v2c/v3 Centralized Management of Equipment, RMON, Port Mirroring, QoS, LLDP, DHCP Server, DHCP Client, File Management, Log Management, Port Statistics, SYSLOG management

Security

Classification of User Permissions, Anti-attack Control, ACL, 802.1X Authentication, Port Alarm, Power Supply Alarm, Storm Suppression, SSHD Configuration, Telnet Configuration, HTTPS Configuration

Switch Function

802.1Q Vlan, Static/Dynamic Port Aggregation, Bandwidth Management, Flow Control, Port Isolation

Unicast / Multicast

Static Multicast, GMRP, IGMP-Snooping

Redundancy

Protocol

Ring, STP/RSTP/MSTP

Fault Diagnosis

Ping, Traceroute, Port Loopback

Time Management

SNTP

PoE

Maximum power of PoE port: 30W

PoE power supply pin: V+, V+, V- and V- correspond to 1, 2, 3 and 6

Interface

Copper port: 10/100/1000Base-T(X), RJ45, Automatic Flow Control, Full/Half Duplex Mode, MDI/MDI-X Autotunning

SFP slot: 1000Base-SFP

Flange interface: 2*4 LC-LC, single mode fiber, supports Bypass

Console port: CLI command line management port (RS-232), RJ45

Alarm port: 2-pin 5.08mm pitch terminal blocks, support 1 relay alarm output, current carrying capacity is 0.3A/125VAC or 1A/30VDC

LED Indicator

Running Indicator, Port Indicator, Power Supply Indicator, Alarm Indicator

Switch

Property

Transmission mode: store and forward

MAC address: 8K

Packet buffer size: 4Mbit

Backplane bandwidth: 24G

Switch time delay: < 10μs

Power

Requirement

Power supply range:

AC power supply product: 220VAC (100~240VAC);

DC power supply product: 48VDC (12~48VDC);

PoE product: 48VDC

Built-in dual power supply redundancy

support 3.0A over-current protection

Power

Consumption

IES3000-8GT4GS-2BP-2P220:

No-load: 5.9W@220VAC

Full-load: 11.6W@220VAC

Environmental

Limit

Operating temperature: -40~75℃

Storage temperature: -40~85℃

Relative humidity: 5%～95% (no condensation)

Physical Characteristic

Housing: IP40 protection, metal

Installation: rack mounting

Weight: 1.6kg

Dimension (W x H x D): 290mm×44mm×174.8mm

Industrial

Standard

IEC61000-4-2 (ESD, electrostatic discharge), Level 3

Air discharge: ±8kV

Contact discharge: ±6kV

IEC61000-4-4 (EFT, electrical fast transient), Level 3

Power supply: ±2kV

Signal: ±1kV

IEC61000-4-5 (Surge), Level 3

Power supply: differential mode±1kV, common mode±2kV

Signal: differential mode±1kV, common mode±2kV

Shock: IEC 60068-2-27

Free fall: IEC 60068-2-32

Vibration: IEC 60068-2-6

Certification

CE, FCC, RoHS

Dimension:

Unit:mm

Order Information:

Available Models	Gigabit Copper Port	Gigabit PoE Port	Gigabit SFP Slot	Fiber Port Bypass	Power Supply
IES3000-8GP4GS-2BP-2P48-240W	-	8	4	2	48VDC
IES3000-8GT4GS-2BP-P48P220	8	-	4	2	48VDC(12~48VDC), 220VAC(100~240VAC)
IES3000-8GT4GS-2BP-2P48	8	-	4	2	48VDC(12~48VDC)
IES3000-8GT4GS-2BP-2P220	8	-	4	2	220VAC(100~240VAC)