Active Member
|
[China]
Address: RM 311 3/F LINZHAN FORTUNE BUILDING No.1 SHENHUA STREET SHENFENG ROAD LIUYUE LONGGANG AREA SHENZHEN,CHINA
Contact name:VIVI
DELI ELECTRONICS TECHNOLOGY CO.,LTD |
|
|
RC4558P# Dual General - Purpose Operational Amplifiers DIP-8 Through Hole 30V 1.25mA
| Product Attribute | Attribute Value | |
|---|---|---|
| Texas Instruments | ||
| Operational Amplifiers - Op Amps | ||
| RoHS: | Details | |
| Through Hole | ||
| DIP-8 | ||
| 2 Channel | ||
| 30 V | ||
| 3 MHz | ||
| 1.7 V/us | ||
| 6 mV | ||
| 10 V | ||
| 0 C | ||
| + 70 C | ||
| 500 nA | ||
| 1.25 mA | ||
| No Shutdown | ||
| 70 dB to 90 dB | ||
| 8 nV/sqrt Hz | ||
| RC4558 | ||
| Tube | ||
| Amplifier Type: | General Purpose Amplifier | |
| Height: | 4.57 mm | |
| Length: | 9.81 mm | |
| Product: | Operational Amplifiers | |
| Supply Type: | Single, Dual | |
| Technology: | Bipolar | |
| Width: | 6.35 mm | |
| Brand: | Texas Instruments | |
| Dual Supply Voltage: | +/- 9 V, +/- 12 V | |
| Maximum Dual Supply Voltage: | +/- 15 V | |
| Minimum Dual Supply Voltage: | +/- 5 V | |
| Operating Supply Voltage: | 10 V to 30 V, +/- 5 V to +/- 15 V | |
| Product Type: | Op Amps - Operational Amplifiers | |
| Factory Pack Quantity: | 50 | |
| Subcategory: | Amplifier ICs | |
| Voltage Gain dB: | 109.54 dB | |
| Unit Weight: | 0.015535 oz |
1 Features
●Continuous Short-Circuit Protection
●Wide Common-Mode and Differential Voltage Ranges
●No Frequency Compensation Required
●Low Power Consumption
●No Latch-Up
●Unity-Gain Bandwidth: 3 MHz Typ
●Gain and Phase Match Between Amplifiers
●Low Noise: 8 nV/VHz Typ at 1 kHz
2 Applications
●DVD Recorders and Players
●Pro Audio Mixers
3 Description
The RC4558 device is a dual general-purpose operational amplifer,
with each half electrically similar to the μA741,
except that offset null capability is not provided.
The high common-mode input voltage range ,
and the absence of latch-up make this amplifier ideal for voltage-follower applications.
The device is short- circuit protected,
and the internal frequency compensation ensures stability without external components.
4.3 Feature Description
4.3.1 Unity-Gain Bandwidth The unity-gain bandwidth is the frequency up to which an amplifier with a unity gain
may be operated without greatly distorting the signal. The RC4558 device has a 3-MHz unity-gain bandwidth.
4.3.2 Common-Mode Rejection Ratio The common-mode rejection ratio (CMRR)
of an amplifier is a measure of how well the device rejects unwanted input signals common to both input leads.
It is found by taking the ratio of the change in input offset voltage to the change in the input voltage,
then converting to decibels. Ideally the CMRR is infinite,
but in practice, amplifiers are designed to have it as high as possible.
The CMRR of the RC4558 device is 90 dB.
4.3.3 Slew Rate The slew rate is the rate at which an operational amplifier can change its output when there is a change on the input.
The RC4558 device has a 1.7 V/μs slew rate.
4.3.4 Device Functional Modes The RC4558 device is powered on when the supply is connected.
Each of these devices can be operated as a single supply operational amplifier or dual supply amplifier depending on the application.
Deli electronics tehcnology Co.,Ltd
Email:sales3@deli-ic.com
Skype:hkdeli881
Contact: VIVI-CHEN
