HF·A SERIES FIBER LASER CUTTING MACHINE
HF·A Series is a Hymson single table fiber laser cutting machine.
Product Introduction
HF·A Series Fiber Laser Cutting Machine
- HF·A Series is a Hymson single table fiber laser cutting machine.
- The single table type can be applied flexibly,
- The integrated main machine covers a small area, with a high availability,
- Integrating an electric cabinet a laser cabinet, with the gas path and oil circuit for main machine driving divided into modules and the whole machine of high quality matching,
- Mobile operating table, for easy operation.
Modular Design
- Several components with independent functions are integrated scientifically and systematically for high quality matching of the whole machine;
- With high strength and high reliability of the machine guaranteed, the product development speed is improved to respond to market demand rapidly.
Tube Welded Construction of the Machine Body
- The machine body is welded with high strength standard tubes and, after welded, undergoes high temperature annealing treatment to eliminate the internal stress caused by the material itself and welding to the utmost extent, which ensures high strength, high precision and high tolerance;
- The machine complies with the standard for precision numerical control machine design and has undergone data simulation analysis and inspection of durability to guarantee stable machine structure and long-time and stable operation of the equipment.
High Strength Cross Beam
- Adopting Hymson’s patented structural design of drawn aluminum cross beam for light overall mass, high tensile strength and superior dynamic performance;
- Through simulated data analysis and testing of different models and lengths, ensuring quality, rigidity and dynamic nature of the cross beam in long-time running.
Zoned Ventilation System
- Adopting zoned and segmental ventilation and using follow-up control to control the acts of cylinders in various zones to realize lower energy consumption and higher efficiency;
- Only the suction opening for the cutting operating range is opened for shorter path, more centralized and stronger wind power, and better dust removal effect.
Precision Gear Drive
- ALPHA precision machined high precision pinions and racks having been finished and ground;
- Super high matching rate and precision, high bite rate, smoother and quiet rotation;
- Compact load driven structure for effectively reducing driving torque and eliminating vibration;
- Adopting double drive gantry motion system for higher acceleration and faster movement speed.
Servo Motor
- Branded servo motor and drive, with high encoder resolution;
- Integrating high dynamics, compact structure and energy efficiency.
CNC Numerical Control System
FSCUT2000 laser control system
The system is taken as the control platform of a flat laser cutting
machine and is developed on the basis of Windows 10 architecture.
It communicates with the servo through ErtherCat bus agreement. The
data calculations are conducted with an industrial grade CPU, which
is secure, reliable and self-diagnostics.
FSCUT2000, applied to the flat laser cutting system, mainly
contains the laser cutting technology processing, common nesting
functions and laser processing control. The main functions include
the graphic processing, parameter setting, custom cutting process
editing, nesting, path planning, simulation, and cutting process
control.
The system can be combined with automatic loading and
unloading production lines and flexible production lines of FMS
laser cutting to support the automated production.
The built-in CAM nesting with common editing, layout and
graphic editing functions can distinguish the internal and external
moulds auromatically, determine the direction of cutting gap
compensation based on the inner and outer moulds, and inspect the
leads. The automatic nesting is time- and effort-saving, and
supports the automatic co-edging and generation of residuals.
The automatic optimization will be carried out when
opening/importing external files such as DXF, including: the
removal of duplicate lines and minimal graphics, the merging of
connected lines, and the automatic distinction of internal and
external moulds and sorting. The above functions can be customized
and manually set.
The segmental piercing, progressive piercing,
pre-piercing and group pre-piercing, as well as the setting of the
separate laser power, frequency, laser type, gas type, air
pressure, peak current, delay time, following height, etc. in the
piercing and cutting process are available.
The memory of machining breakpoints, forward
and backward tracing of breakpoints, machining of part of graphics,
positioning to any point in the stop and pause state, and starting
machining from any position are available.
Compatible with multiple files
The system can be compatible with AI, DXF, PLT, Gerber, LXD and
other graphic data formats, as well as G-generation international
standards from ACTcut, Lantek, Master Cam, Type3, etc. It is
convenient for users to import external graphics quickly for the
proofing and debugging.
Power/frequency curve
The frequency/power curve can be edited in real time, and the parameters related to the slow start can be set.
Samples
User’s Machine Installation Site Condition Preparation
S/N | Content |
1 | Power Supply Capacity: ≥60KVA |
2 | Power Supply Requirements: (1) Three-phase voltage stability＜±5%; (2) Unbalancedness of three-phase power supply < 2.5% (Note: Abrupt changes in supply voltage and sudden power failure are not allowed, otherwise, the laser may be damaged easily. Good grounding is required (ground resistance < 3 Ohm). |
3 | Compressed Air Supply Requirements: |
4 | Auxiliary gas for cutting: Oxygen (O2)/ Nitrogen (N2): Purity ≥ 99.99% |
5 | Sheet (Tube) Cutting: Black skin, smooth, level, rustless, evenly rolled, reaching the ISO standard. |
6 | Installation Site Requirements: 1. The foundation for equipment installation does not settle and should be constructed according to the foundation drawing provided by Party B; 2. Temperature Requirement: [5-30]℃; 3. Humidity Requirement: < 70%; 4. After the equipment is installed and commissioned, separate the laser and install an air conditioner. |
7 | The equipment operator should have been graduated from a secondary specialized school or above and have the experience in operation of computers and general numerically-controlled lathes. The equipment should be equipped with a programming computer. |
Installation and Commissioning
1. All the equipment provided under the contract should be
installed and commissioned by Hymson. After the contract is signed,
we will determine the specific installation location of the
equipment in the shortest time and provide the equipment foundation
drawing within 5 working days after the contract goes into effect.
Prior to the installation and commissioning, you should prepare the
equipment foundation strictly according to the requirements
specified in the equipment foundation drawing provided by Hymson.
After the installation site is ensured, the engineers
will install and commission the equipment with the tools they
carry and, within 10 days, complete the installation,
commissioning, technical index tests, training, acceptance and
delivery for use;
2. The expenses related to the installation and commissioning and the staff assigned should be borne by Hymson.
2. The expenses related to the installation and commissioning and the staff assigned should be borne by Hymson.
Transportation and Logistics
1. The place of delivery should be your installation site.
2. Standard packaging suitable for long-distance transportation by truck, being dampproof, rust-proof and shockproof; suitable for integral hoisting and indicating the centre of gravity for lifting and the hoisting position;
3. Mode of Transport: Motor transport. We should bear the freight and insurance.
4. Each packaging box should be accompanied by a detailed packing list and a quality certification as well as the instructions on the equipment and other documents and materials. The packing list should be outside the packaging box and the quality certification should be inside the packaging box.
2. Standard packaging suitable for long-distance transportation by truck, being dampproof, rust-proof and shockproof; suitable for integral hoisting and indicating the centre of gravity for lifting and the hoisting position;
3. Mode of Transport: Motor transport. We should bear the freight and insurance.
4. Each packaging box should be accompanied by a detailed packing list and a quality certification as well as the instructions on the equipment and other documents and materials. The packing list should be outside the packaging box and the quality certification should be inside the packaging box.
Pre-sale Service
1. Welcome to send sample material to us for testing laser marking
engraving for you.
2. We offer pictures, videos and other relevant documents for you to know more about the machine.
3. We are online and would respond fast to answer all your questions.
4. If you have chance visiting China, you are warmly welcome to visit our factory.
2. We offer pictures, videos and other relevant documents for you to know more about the machine.
3. We are online and would respond fast to answer all your questions.
4. If you have chance visiting China, you are warmly welcome to visit our factory.
After-sale Service
1. Any parts have a quality problem during the warranty period, We
will send you a new replacement for free. And Customer affords the
replacement shipping cost.
2. The training video, detailed manual, and catalog sent with the machine. The customer could study the operation of the machine by watching the clear training video.
3. If there is a technical problem or new inquiry, Hymson has a fast response to service support by online or email even if need by the phone call.
4. Professional technical support and after sales following up. A free software update.
2. The training video, detailed manual, and catalog sent with the machine. The customer could study the operation of the machine by watching the clear training video.
3. If there is a technical problem or new inquiry, Hymson has a fast response to service support by online or email even if need by the phone call.
4. Professional technical support and after sales following up. A free software update.
FAQ
1) What are the primary products of your company?
Our primary products include sheet metal laser cutting machine, fiber laser 1500w cutting machine, tube laser cutting machine, precision laser cutting machine, laser welding machine, 1.5 kw fiber laser cutting machine at a great metal sheet cutter price.
2) Where is your fiber laser equipment applied to?
Our 1.5 kw fiber laser cutting machine is suitable for all kind of stainless steel, carbon steel, aluminium, copper, galvanized steel, electrolytic steel and silicon steel etc.
3) What are the advantages of your laser equipment?
By using Hymson laser, you can monitor end-to-end process and take complete control of all the machining process. The whole machining process of the fiber laser 1500w cutting machine will be done smoothly, which will greatly improve production efficiency. In addition, the precision and consistency of the products in mass production is guaranteed.
4) How to do control the quality when you produce laser equipment?
We introduce international advanced production technology, and strictly implement a series of measures of quality and cost control to ensure the quality of laser cutting machine. In addition, all raw materials are strictly inspected in accordance with international standards before they are put into production.
5) Which countries are your laser machinery sold to?
Our fiber laser 1500w cutting machine sell all over the world, such as United States, Spain,Netherlands,Poland,France,Turkey, Switzerland,Iran,Egypt, India, South Africa, Malaysia, Canada,Mexico,Colombia,Brazil,Chile,Korea, Japan and many other countries.
Our primary products include sheet metal laser cutting machine, fiber laser 1500w cutting machine, tube laser cutting machine, precision laser cutting machine, laser welding machine, 1.5 kw fiber laser cutting machine at a great metal sheet cutter price.
2) Where is your fiber laser equipment applied to?
Our 1.5 kw fiber laser cutting machine is suitable for all kind of stainless steel, carbon steel, aluminium, copper, galvanized steel, electrolytic steel and silicon steel etc.
3) What are the advantages of your laser equipment?
By using Hymson laser, you can monitor end-to-end process and take complete control of all the machining process. The whole machining process of the fiber laser 1500w cutting machine will be done smoothly, which will greatly improve production efficiency. In addition, the precision and consistency of the products in mass production is guaranteed.
4) How to do control the quality when you produce laser equipment?
We introduce international advanced production technology, and strictly implement a series of measures of quality and cost control to ensure the quality of laser cutting machine. In addition, all raw materials are strictly inspected in accordance with international standards before they are put into production.
5) Which countries are your laser machinery sold to?
Our fiber laser 1500w cutting machine sell all over the world, such as United States, Spain,Netherlands,Poland,France,Turkey, Switzerland,Iran,Egypt, India, South Africa, Malaysia, Canada,Mexico,Colombia,Brazil,Chile,Korea, Japan and many other countries.
Performance Indexes
| Equipment Model | HF3015A | HF4020A | HF6020A |
| Effective Cutting Range | 3000mmX1500mm | 4000mmX2000mm | 6000mmX2000mm |
| X/Y-axis Positioning Accuracy | ±0.03mm/m | ±0.03mm/m | ±0.03mm/m |
| Maximum Speed of X/Y-axis Linkage Positioning | 110m/min | 110m/min | 110m/min |
| Maximum X/Y-axis Acceleration | 1.2g | 1.0g | 1.0g |
| Maximum Z-axis Positioning Speed | 40 m/min | 40 m/min | 40 m/min |
| Floor Space of Whole Machine | 5000mmX2500mm | 6300mmX3000mm |
