Results forhydrostatic head tester 220vfrom 4511 Products.
|
Mechanical Keystroke Tester Economic Type 100gf - 2000gf with 220V 50Hz Model: RS-8330 Purpose: Apply for key life time test of mobile, telephone, in-car system, PDA, Bluetooth ...
|
|
|
|
Multi Conductor Bending Test Machine, Cable Flex Tester Machines 220V 50Hz Model: C5092 Purpose: Cable flexible tester is suitable for the bending testing of the multi-wires cable, ...
|
|
|
|
Linearization Touchscreen Monitor Testing Equipment With 9 Kinds 220V 10A Model: RS-5610R Purpose: This touch panel test machine independently researched, developed and manufacture...
|
|
|
|
50mm~300mm Mobile Phone Micro Drop Testing Machine, Handset Repeated Drop Test Machine Features: (1) All the testing conditions is inputted by touch panel directly. (2) Adopt Japan ...
|
|
|
|
Cloth / Paper Taber Abrasion Machine ASTM Abrasion Test 220V 3A Model: RS-8305 Purpose: The tester applied for cloth, paper, pvc, paint, plywood, leather, tile, laminate floor, ...
|
|
|
|
220V 50Hz IEC60529-2001 Dust Environmental Test Chamber Purpose: This machine applies for electronic, houseware, motor unit to evaluate the resistance, storage and running under ...
|
|
|
|
Drop Testing Machine 220V 120V Remote Controller Tumble Drop Impact Test Apparatus with 2 Steel Tumbler Model: BD1050 Application: Rolling drop impact tester is suitable for ...
|
|
|
|
Tear Resistant Paper Package Testing Equipment GB/T 455 High Temperature Model: IN-3007 Purpose: Tearing resistance tester is used for testing tearing resistance of paper and paper ...
|
|
|
|
ASTM D4329 Environmental Test Chamber, UV Acccelerated weathering test Chamber Model: Z-UV2 Product purpose: The damage products caused by sunlight and moisture to material is ...
|
|
|
|
Temperature-type Battery Short Circuit Tester , IEC62133 Battery Short Circuit Tester Standard It is conforms to IEC62133 clause 7.3.2 ,8.3.1,8.3.2 IEC60086-4 clause 6.5.1 IEC60086...
|
|
|
|
ANSI/AAMI EC12:2000(R2005) Disposable ECG Electrode Performance Tester Notes This instrument uses AC 220V /50H z, to prevent failure or damage, use the tester within the specified ...
|
|
|
|
IEC60598-1 | Fluorescent Lamp Holder Axial Force Tester Luminaries Test Equipment Product information: The test equipment is designed and manufactured according to IEC60598-1 ...
|
|
|
|
220V Oxygen Air Bomb Aging Test Chamber With Intelligent Control GB/T2951.12-2008 Product information: This aging tester conforms to the standard requirements of GB/T2951.12-2008 ...
|
|
|
|
Respirator particle protection effect detector 1 Product introduction ZR - 1002 masks particle detector is protective effect on volume of 500 l self-purification test chamber was ...
|
|
|
|
BS1363-2:1995 figure 20 | Tumbling barrel Product details: This tester conforms to the standard requirement of VDE0620 ,IEC68-2-32,BS1363.1,EN50075,UL60730. it is used to check the ...
|
|
|
|
BTS-20V10A Battery Testing System , Battery Continuous charge , Battery Forced Discharge Technical Parameter: BTS-20V10A Battery tester Model Number: BTS- 20 V 10 A Battery tester ...
|
|
|
|
UL Rain Tester Description: This equipment is a device intended for use in wet locations.Water shall not enter the ballast or device lampholder compartments. Specification: Spray ...
|
|
|
|
1 Station Electrical Appliance Tester 220V Label Marking Abrasion IEC60730-1 Production introduction: This testing apparatus is design and manufactured according to IEC60730-1 ...
|
|
|
|
IEC 60669-1 Load Bank, Plug Socket Tester, 220V 50Hz Single station Standard: IEC 60669-1, IEC 60884-1 2013 clause 20 and 21, IEC 60950-1, IEC 60598-1, IEC61058-1 and so on Product ...
|
|
|
|
EN71 Flammability Testing Equipment 45° Automatic Flammability Tester 220V,50Hz 0-99.9S Standard EN71,ASTM D1230, CRF 16-1610,CALIF TB 117,FTMS191-5908 Application It is used to ...
|
|
|
You may also be interested in :