Rexroth A11VLO145LRDS Variable Displacement Axial Piston Pump

Rexroth series A11VLO145LRDS Axial Piston variable Displacement Pump

Hydraulic pump features

1. Start at any time in pressure condition.

2. For pass-axis structure, and for multi-loop system

3. Low-noise, high efficiency, high reliability, long life

4. Small size, high power density

5. Excellent oil absorption properties.

6. Completely interchangeable with original

7. For engineering machinery, maritime and boat and industrial machinery etc.

8. For open-loop Swashplate axial piston pump.

9. Continuous working pressure up to 280bar, the instantaneous maximum working pressure up to 350bar.

10. Flow is proportional to drive speed and displacement, and can be achieved by adjusting the swashplate angle stepless variable

11. There are constant pressure, constant-power constant pressure, constant-voltage constant-flow and other control method, and the control response speed

12. Drive shaft can withstand the axial and radial loads

Hydraulic pump parameters

Hydraulic pump photos

Hydraulic pump application field

Our hydraulic pump are mainly used in industrial area and construction machinery, such as excavator,boring machine,hydraulic system

steel manufacturer,extruder machine,aluminum manufacturer,electric factory,loading machine,pump machinery,drilling machine,coal winning machine,petroleum machinery,injection molding machine concrete mixer truck,and so on

FAQ

1.What does hydraulic pump do?

A hydraulic pump is a mechanical source of power that converts mechanical power into hydraulic energy (hydrostatic energy i.e. flow, pressure). It generates flow with enough power to overcome pressure induced by the load at the pump outlet.

2.Where are hydraulic pumps used?

Hydraulic pumps are used on excavators, cranes, loaders, tractors, vacuum trucks, forestry equipment, graders, dump trucks, mining machinery, etc. Mobile applications use hydraulic pumps more prolifically than do industrial machines, because electric actuators are generally not used for mobile machinery

3.What is the difference between hydraulic motor and hydraulic pump?

Hydraulic pump is connected with the prime mover, and the pump shaft has no additional radial load; while hydraulic motor is connected with the load, such as sprockets, pulleys, gears and so on, its main shaft will bear a higher radial load.  The low pressure chamber of the hydraulic pump is usually vacuum

Packing photos and shipping

Normally we use wooden case,out of pump we will put plastic flim firstly then put into wooden case