UFL Telescopic Single Acting Cylinder Hydraulic Jack 2000 Bar In Narrow Spaces

                                                                          HYDRAULIC JACK

Type:ULF

1. Suitable for space-restricted working conditionsPaint surface enhanced corrosion capacity

2. Single acting, load return

3. Maximum operating pressure:2000Bar

4.Extra-long handle makes it easy to fit into small spaces

5.The high-pressure coupling adopts a one-way valve design, no hydraulic oil drips

6.Gravity eccentric load design, maximum eccentric load 4°

7.Available in standard or custom models, to suit any application. Works with hand, air or electrical pump types

8.Suitable for narrow spaces, bridges, ships and any working conditions that need to be jacked

SAFETY INFORMATION
Please read carefullyfollow instructions, warnings and cautions.Please observe the safety precautions so that it can avoid personal and equipment to injury when you operate the equipment.
WARNING
MAKE SURE THAT THE CYLINDER WILLNOT HOLD LOAD FOR A LONG TIME
A cylinder, when used as a load lifting device,should never be used as a load holding device.After the load has been raised, it should be blocked.
WARNING
DO NOT EXCEED EQUIPMENTRATINGS
Never attempt to lit a load weighing more than the capacity of the cylinder. Overloading causes equipment failure and possible personal injury. These cylinders are designed for a maximum pressure of 2000Bar. DO not connect these cylinders to a pump with a higher pressure rating.
WARNING
MAKE SURE SETUP IS STABLE BEFORE LIFTING LOAD
The cylinder should be placed on a flat surface that can support the load. Where applicable, use a cylinder base for added stability.
Do not weld or otherwise modify the cylinder to attach a base or other support.Avoid situations where loads are not directly centered on the

WARNING
USE ONLY RIGID PIECES TO HOLD LOADS
Carefully select steel or wood blocks that are capable of supporting the load. Never use a hydraulic cylinder as a shim or spacer in any lfting or pressing application.
WARNING
ONLY USE HYDRAULIC CYLINDER IN A COUPLED SYSTEM Never use a cylinder with unconnected couplers. If the cylinder beco-mes extremely overloaded, the coupler check ball and/or hydraulic oil may shoot out of the cylinder causing severe personal injury. CAUTION
AVOID DAMAGING HYDRAULIC HOSE
Avoid sharp bends and kinks when routing hydraulic hoses. Using a bent or kinked hose will cause severe back-pressure.Also sharp bends and kinks will internally damage the hose leading to premature failure. Do not drop heavy objects on hose.A sharp impact may cause internal damage to hose wire strands.Applying pressure to a damaged hose may cause it o rupture.

Do not use the hydraulic hose to carry a hydraulic component(PUMPS CYLINDERS, VALVES)CAUTION
KEEP HYDRAULIC EQUIPMENT AWAY FROM FLAMES AND HEAT Excessive heat will soften packings and seals, resulting in fluid leaks. Heat also weakens hose materials and packings. For optimum perform ance do not expose equipment to temperatures of 150°F(65°C) or higher. Protect hoses and cylinders from weld spatter. WARNING
DO NOT HANDLE PRESSURIZED HOSES.
Escaping oil under pressure can penetrate the skin,causing serious injury,if oil is injected under the skin,see a doctor immediately.

※The bottom surface of the cylinder shall be all on a hard plane to use

Our process: user consultation-quotation-signing contract-accepting advance payment-design drawings according to user requirements and user confirmation-production according to drawings