Home Companies SHANGHAI UNITE STEEL

Carbon Steel Solid Round Bar 1010 / CK10 Grade Hot Rolled Techniques

Active Member

Contact Us

[China]

Address: Room 1109, Loft Office, Green Land International Plaza, No. 275-8 Guoding East Road, Shanghai 200433, P.R. China. (admin(a)shunitesteel.com)

Contact name:Eric

SHANGHAI UNITE STEEL

Carbon Steel Solid Round Bar 1010 / CK10 Grade Hot Rolled Techniques

Country/Region	china
City & Province	shanghai shanghai

Product Details

INTRODUCTION

High quality carbon structural steel is carbon steel with carbon content less than 0.8%. It contains less sulfur, phosphorus and non-metallic inclusions than carbon structural steel, and its mechanical properties are better. This kind of steel has a large output and a wide range of uses. Generally, it is rolled (forged) into round, square and flat sections, plates and seamless steel pipes. It is mainly used to manufacture parts and components of general structure and mechanical structure, as well as building structural parts and pipelines for conveying fluids. According to the use requirements, sometimes heat treatment (normalizing or tempering) is needed after use.

AISI 1010 carbon steel is a plain carbon steel with 0.10% carbon content. This steel has relatively low strength but it can be quenched and tempered to increase strength.

SUPPLY RANGE OF of AISI 1010

-Dimension: Diameter 4-1600 mm, any length below 16 meters

-Delivery Conditions:

Cold drawn: 4-100 mm

Peeled: 30-160 mm

Grinded: 4- 600 mm

Turned: 130-1200 mm

Hot rolled: 12-320 mm

Hot forged: 130-1600 mm

-EAF+(ESR) or EAF+LF+VD+(ESR)

-HOT rolled; Cold rolled; Forged; Cold Drawn

-Heat Treatment: Untreated, Annealing, N+T, Q+T

-Smelting: EAF+LF+VD (+ESR)

-Surface Finish: Black, Rough Machined, Peeled, Turned or upon request

-UT 100% passed

-Cutting service provided

-Third Party inspection is acceptable (SGS, BV etc.)

Standard

ASTM A213; ASTM A335; ASTM A519; ASTM A106; ASTM A29; JIS G3462; JIS G3458; JIS G3444; JIS G4053; DIN17175; DIN1629; DIN2391; GB/9948, GB/6479; GB/T8162; GB/T8163; GB/T 3077; EN 10297; EN 10084; EN 10083; ISO 683/11; IOS 683/10; IOS 683/1; etc.

Equivalent grades of steel AISI 1010

ASTM A29/M	Germany DIN,WNr	JIS G4051	China GB	Inter ISO
1010	C10 / CK10	S10C	10	C10

Chemical Requirements, Composition, %

Element	ASTM A29 1010	EN 10084 C10E 1.11221	JIS G4051 S10C	ISO 683/18 C10
Carbon	0.08–0.13	0.07-0.13	0.08-0.13	0.07-0.13
Manganese	0.30–0.60	0.30-0.60	0.30-0.60	0.30-0.60
Phosphorus	0.040 max	0.035 max	0.030 max	0.035 max
Sulfur	0.050 max	0.035 max	0.035 max	0.035 max
Silicon	No Requirement	0.40 max	0.15-0.35	0.15-0.40

Mechanical properties

Standard

Steel Grade

Yield strength MPa (>=)

Tensile strength MPa (>=)

Elongation %

(>=)

Reduction of area % (>=)

Hardness Rockwell B

ASTM A29

1010

305

365

Quality Assurance

Below inspection will be done in the production.
(1) ray detection---RT;
(2) ultrasonic testing---UT;
(3) Magnetic Particle Testing-MT;
(4) penetration testing-PT;
(5) eddy current flaw detection-ET

PROCESSING

Machinability

The machinability of AISI 1010 carbon steel, especially in the cold drawn or cold worked state, is considered as fairly good.

Forming

AISI 1010 carbon steel has good formability and ductility, and can be easily formed using conventional methods.

Welding

AISI 1010 carbon steel can be welded using all the conventional welding techniques.

Heat treatment

AISI 1010 carbon steel is mostly used in the annealed or case hardened condition. However, it can also be heat treated, quenched and tempered but the cost for performing these processes are very high.

Forging

Forging can be performed on AISI 1010 carbon steel between 1260 and 982°C (2300 and 1800°F).

Hot Working

The hot working capacity of AISI 1010 carbon steel is between the ranges of 482 to 93°C (900 to 200°F).

Cold Working

The cold working capacity of AISI 1010 carbon steel is good. In cases where severe cold working is performed stress relief or full anneal has to be performed.

Annealing

A full anneal process can be performed for AISI 1010 carbon steel at 871 to 982°C (1600 to 1800°F), which is followed by slow cooling process in the furnace. A stress relief anneal process can also be done at 538°C (1000°F) and then gradually cooled. AISI 1010 carbon steel in the full annealed condition has a tensile strength of about 45 ksi.

Tempering

Tempering can be performed on AISI 1010 carbon steel, after hardening process is completed, at 316 to 593°C (600 to 1100°F). This depends upon the strength level that is required. When tempering is performed at 538°C (1000 F), the tensile strength will be about 75 ksi.

Hardening

AISI 1010 carbon steel can be hardened by both cold working and heat treatment.

What we can offer?

-We offer a wide range of steel products in a wide variety of dimensions and executions, according to the common international specifications or customize.

-Machining and heat treatment are available.

-Also, we advise you in choosing the right materials.

Shape Available

Solid round bar
Flat bar
Square bar
Hexagon bar
Block
Plate
Sheet
Wire rod
Strip

Our Advantages

High mechanical property and quenching, enable the surface share equal hardness after deal with it
Good polishing and low roughness
Making the heat-treatment to harden condition before using it
Competitive price
Fast production lead-time
All the material are inspected with 3 times to meet the highly standards
Pure steel quality & stable quality to be guarantee

OUR MAIN PRODUCTS ARE LISTED AS BELOW

Notes:

Available Size:
-Round: Dia. 4 -1600 mm
-Flat: T. 10-120 mm x W. 60-810 mm
-Block: T. 80-1200 mm x W. 100-1600 mm

PAYMENT AND SHIPPING

1. Both T/T and L/C will be acceptable

2. Trade Terms: FOB, CIF, CFR

3. The delivery will be in 10-15 days if have stock; For customized items, the delivery will be negotiated by both parties

4. Shipping by sea freight from Shanghai Port (PRC) for Bulk orders, by airfreight or express for samples

COMPANY INFORMATION

Shanghai Unite Steel Trading Co., Ltd

We are committed to integrate engineering steel resources in china and serve the global engineering steel market. Our company has more than 15 years of experience in steel researching, production, managing and sales. And our team mostly are based on and worked in national famous steel enterprise.

In the aspect of resources and information, we have established cooperative and stronger relationship with nearly hundred enterprises, either state-owned or private owned in china.

What’s more, we have built long, deep and close business relationship with dozens of steel company, Sharing and holding equities with several steel enterprises. Because of the close cooperation with steel companies and our pioneering spirit, which can ensure us stay at the top competition, and ensure our customers get what they really want!

FAQ

Q: Are you a manufacturer or merely a trader?
A: We are group of companies and owned manufacturer bases and trading company. We specialized in special steel which include alloy structural steel and carbon steel and stainless steel, etc. All material are with high quality and competitive price.

Q: How do you guarantee the quality of your product?
A: Firstly, we can provide the certificates from the third party, such as TUV, CE, if you need. Secondly, we have a complete set of inspection system and every process is checked by QC. Quality is the lifeline of enterprise survival.

Q: Delivery time?
A: We have ready stock for most of material grades in our warehouse. If the material doesn't have stock, the delivery lead time is about 5-30 days after receiving your prepayment or firm order.

Q: What is the payment term?
A: T/T or L/C.

Q: Can we visit your company and factory?
A: Yes, warmly welcome! We can book the hotel for you before you come to China and arrange our driver to our airport to pick you up when you come.