Active Member
|
[China]
Address: Room 1109, Loft Office, Green Land International Plaza, No. 275-8 Guoding East Road, Shanghai 200433, P.R. China. (admin(a)shunitesteel.com)
Contact name:Eric
SHANGHAI UNITE STEEL |
|
|
AISI1045 / S45c Hot Rolled Steel Bar , Polished Carbon Steel Round Bar Size 10-320mm
APPLICATIONS:
Plain carbon steel for mechanical engineering and automotive components.
It is usually supplied untreated but can be supplied to order in the normalized or finally heat treated (quenched and tempered to "Q" or "R" properties), which is adequate for a wide range of applications.
It is a very popular grade of through-hardening medium carbon steel, which is readily machinable in any condition. It is suitable for the manufacture of parts such as general-purpose axles and shafts, gears, bolts and studs. It can be further surface-hardened typically to 50-55 HRC by induction processes, producing components with enhanced wear resistance.
In its heat treated forms possesses good homogenous metallurgical structures, giving consistent machining properties.
RELATED SPECIFICATIONS:
European: C40, C45, Ck40,Ck45, Cm40, Cm45,
Germany DIN 1.1191 DIN1.1201
Great Britain: BS970: 1955 EN8,
BS970/PD970: 1970 onwards 080M40, 080M46, 060A47
France: AFNOR XC 42 TS , AFNOR XC 45 , AFNOR XC 48 , AFNOR XC42
Sweden: SS 1672
Werkstoff No.: 1.0511, 1.1186, 1.1189.
USA: ASTM A29 , ASTM A510 , ASTM A519 ,
ASTM A576 , ASTM A682 ,
FED QQ-S-635 (C1045) , FED QQ-S-700 (1045) ,
SAE J403 , SAE J412 , SAE J414 , UNS G10450
SAE: 1045, 1049, 1039, 1040, 1042, 1043, 1045.
Japan: JIS S 45C , JIS S 48 C
Chemical Composition(%):
Carbon 0.43-0.50
Silicon 0.17-0.37
Manganese 0.60-0.90
Phosphorus 0.04 max
Sulphur 0.04 max
Chrome 0.30 min
Process: EAF/LD+LF+VOD+hot Rolled +Heat Treatment(optional)
Hot forming and heat treatment:
hot rolling:1100 - 850°C
Normalising:840 - 880°C/air
Soft annealing:680 - 710°C/furnace
Hardening:820 - 860°C/water, oil
Tempering:550 - 660°C
Treated for cold shearability +S:max. 255 HB
Soft annealed +A:max. 207 HB
SIZE RANGE:
Round:
Hot Rolled: 10mm-350mm
Length:2000-13000mm or as required
Flat:
Hot rolled: Thickness: 20-130mm Width: less than 610mm
SURFACE FINISHES:
Black, Peeled (K12), Cold Drawn, Turned & Polished (H10, H11), Precision Ground (H9, H8).
4.Forged ratio: no less than 3:1
COLOUR CODE: Red
Test: Ultrasonic test according to SEP 1921-84 C/c
Packing: Plastic reel shaft, and bound, iron wire frame, the paper barrel etc
