Dongguan Jiazheng Hydraulic Technology Co, LTD |
|
Air Powered Swing Clamp Cylinder Automatic Fixture for Mass Production Aluminium Alloy Material
Features:
1. This product is universally used in mass production parts
and machining center fixtures to improve production
efficiency.
2.When the air cylinder is actuated, the clamping arm will
rotate to the design angle during the piston downward stroke, and
then continue to clamp down along the straight line until the
clamping arm clamps the workpiece.
3.When using air powered swing clamp, please install flow control
valve to avoid too fast speed and do not clamp the workpiece during
the swing stroke to avoid damage to the cylinder and internal
parts
4.When the the length of clamping arm needs to be increased ,
please do not exceed 1.5 times the original length.
5.The cylinder material is made of aluminum alloy, the surface
is heat treated, the inner wall surface is smooth and the
service life is long.
Specification
Bore of Cylinder (mm) | Φ25 | Φ32 | Φ40 | Φ50 | Φ63 |
Dia. of Pison | Φ14 | Φ16 | Φ20 | Φ20 | Φ20 |
Press Area pull/push | 3.37/4.91 | 6.03/8.04 | 10.56/12.57 | 16.49/19.63 | 28.03/31.17 |
Theoretical Clamping Force 5kg/cm² | 16kgs | 30kgs | 50kgs | 85kgs | 140kgs |
Swing Stroke (mm) | 9 | 11 | 13 | ||
Clamping Stroke (mm) std/ extention | 13 | 15/30 | 17/43 | ||
Fluid | Filtered Air | ||||
Max Pressure (kg/cm²) | 10kg/cm² | ||||
Normal Operation Pressure | 1---7kg/cm² | ||||
Rotating Direction | Turn Right or Turn Left | ||||
Rotating Angle | Standard angle 90°,Optinal angle 0°, 45°,60° | ||||
Acting Type | Double Acting |
Ordering Code
How to dismantle the clamping arm of Air Powered Swing Clamp