Home Companies Uonel Co.Limtied

OptiX OSN 3500 SSN2AT6 6-port 2-/4- wire and E&M processing board-- OSN3500

Active Member

Contact Us

[China]

Address: B-1906,Zhantao-Tech mansion ,Minzhi road 1079,longhua Dis,shenzhen 518110 China

Contact name:Leo yang

Uonel Co.Limtied

OptiX OSN 3500 SSN2AT6 6-port 2-/4- wire and E&M processing board-- OSN3500

Country/Region	china
City & Province	shenzhen

Product Details

Functions and Features

An AT6 board transmits/receives and processes six-channel analog voice signals or E&M signaling, and provides alarms and events for maintenance.

Table 1 provides the functions and features supported by an AT6 board.

Table 1 Functions and features supported by an AT6 board

Function and Feature	Description
Basic functions	Supports the E&M trunk functions. An N1AT6 board supports only the 1E1M mode. An N2AT6 board supports the 1E1M, 2E2M, reverse 2E2M modes. Supports 2-wire/4-wire audio signals. An N1AT6 board supports the setting of 2-wire/4-wire audio modes by both setting DIP switches manually on the board and using the NMS. An N2AT6 board supports the setting of 2-wire/4-wire audio modes using the NMS. 2-wire/4-wire audio port TX Gain (dB): -20.0 to 1.5, in steps of 0.5. 2-wire/4-wire audio port RX Gain (dB): -7.0 to 14.0, in steps of 0.5. E&M signaling: N1AT6 VER.A: supports the Bell type V E&M signaling. N1AT6 VER.B and N2AT6: support the Bell types I, II, III, IV, V and SSDC5 E&M signaling. NOTE: An AT6 board does not support E&M signaling of Bell types I, III, and V when the NE uses UPM boards. An N2AT6 board supports the association of signaling and services. None: not associate. Signaling Reception: When the port reception status M wire is idle, the audio services sent to the cross-connection side are invalid; when the M wire is busy, the audio services are valid. Signaling Transmission: When the audio services received from the cross-connect side are invalid, the port transmission status E wire is idle; when the services are valid, the E wire is busy. Signaling Reception and Transmission: associates signaling with services in both the receive and transmit directions. NOTE: When working in 2E2M mode, the board processes only the first channel of E&M signaling, if signaling and services are associated.
Port	External ports: N1AT6: DDN-1 to DDN-6, representing six external ports which always use timeslot 1, with port IDs 1 to 6, respectively. N2AT6: an Anea 96 port, providing six logical ports each of which consists of 10 wires, representing DDN-1 to DDN-6. Internal ports: 2M-1 to 2M-6, representing six E1 internal ports that use timeslots 1-15 and 17-31, with port IDs 65 to 70, respectively.
Service processing	Transmits/Receives and processes six-channel 64 kbit/s signals.
Overhead processing	Supports the setting and query of the V5 and J2 bytes.
Alarms and events	Provides alarms and events for maintenance and fault locating.
Maintenance features	Supports warm and cold resets. The warm reset does not affect services. Supports the query of the manufacturing information of the board.

Technical Specifications of the AT6

The technical specifications of the AT6 include the interface specifications, mechanical specifications, and power consumption.

Parameters Specified for Electrical Interfaces

Table 2 and Table 1 lists the parameters specified for the electrical interfaces of the VER.A N1AT6 and VER.B N1AT6.

Table 1 Parameters specified for the electrical interfaces of the VER.B N1AT6 board

Parameter	Value
Type of interface	RJ-45
2/4 wire	Channel bandwidth (Hz)	300 to 3400
	Port Impedance (Ω)	600
	TX Gain (dB)	-20 to 1.5, in steps of 0.5 Default value: -18.0
	RX Gain (dB)	-7.0 to 14.0, in steps of 0.5 Default value: -5.0
	Specifications of the interface	Complies with ITU-T G.711, G.712
E&M	Type	Supports Bell I to V and SSDC5 types. Each type supports the configuration of Signaling unit and Trunk circuit modes.
	Voltage	-48V, -12V
	2E2M	Not Support

Table 2 Parameters specified for the electrical interfaces of the VER.A N1AT6 board

Parameter	Value
Type of interface	RJ-45
2/4 wire	Channel bandwidth (Hz)	300 to 3400
	Port Impedance (Ω)	600
	TX Gain (dB)	-20 to 1.5, in steps of 0.5 Default value: -18.0
	RX Gain (dB)	-7.0 to 14.0, in steps of 0.5 Default value: -5.0
	Specifications of the interface	Complies with ITU-T G.711, G.712
E&M	Type	Supports Bell V and SSDC5 types
	Voltage	-48V
	2E2M	Not Support

Table 3 lists the parameters specified for the Anea 96 interfaces of the N2AT6.

Table 3 Parameters specified for the Anea 96 interfaces of the board

Parameter	Value
Type of interface	Anea 96
2/4 wire	Channel bandwidth (Hz)	300 to 3400
	Port Impedance (Ω)	600
	TX Gain (dB)	-20 to 1.5, in steps of 0.5 Default value: -18.0
	RX Gain (dB)	-7.0 to 14.0, in steps of 0.5 Default value: -5.0
	Specifications of the interface	Complies with ITU-T G.711, G.712
E&M	Type	Supports Bell I to V and SSDC5 types. Each type supports the configuration of Signaling unit and Trunk circuit modes.
	Voltage	-48V, -12V
	2E2M	Support

Mechanical Specifications

The mechanical specifications of the AT6 are as follows:

Dimensions (mm): 25.4 (W) x 235.2 (D) x 261.4 (H)
Weight (kg): 0.75

Power Consumption

The maximum power consumption of the N1AT6 at room temperature (25°C) is 15 W.

The maximum power consumption of the N2AT6 at room temperature (25°C) is 15 W.

Delivery

Cargo will be delivered within 1 day after payment arrived. Tracking Number will be offered once delivery done.

Delivery Options	Estimated Delivery Time
DHL	3-5 business days
Fedex	3-5 business days
By Sea	10-20 business days

Notice:

Above mentioned information are just for your reference only,we will keep you posted for the tracking delivery schedule.There are two delivery options available for by air and by sea:

Deliver to port:

Uonel is responsible for transporting goods to port. All subsequent customs and transportation fees are the
responsibility of the buyer. Uonel will recommend trustworthy local freight forwarders to you.Uonel can facilitate the progress under buyer's permission and at buyer's expense.

Deliver to door:

Uonel will quote all destination charge prior once we have confirmed order.
Uonel is responsible for transporting goods to door after you have made the payment.

Warranty

100% Low Price Guarantee:
Uonel provides high-quality products at low wholesale prices

100% Quality Assurance:
All items are ORIGINAL NEW and GENUINE only.

Free Technical Support:

Our FREE Huawei Expert Consultancy Support is over the phone, by chat, by email or by login remotely.

100% Money Back Guarantee:
You can contact our customer service team to exchange or return any product that you bought from us.

Flexible Secure Payment & Shipment:
Verified authorization: Mcafee Secure, VeriSign Secured

Return Material Authorization (RMA) Process

Standard Hardware Warranty Policy:

Original new sealed Huawei product: 1 Year

The Support Contacts:

If your Huawei products failed, you must contact your sales representative to verify product failure. If the problem still can't correct by remote support methods i.e. email or phone support, the RMA procedure will issue.

Company Profile

Uonel is one of the biggest Huawei Network Hardware distributor in china, founded in 2008. We are a global provider of netwotking products with more than 5000 customers.

We provide original new Huawei Routers,Switches,Firewalls,Wireless APs & controllers,OLTs,GPON modems,optical transceivers.Our company have more than $5million Huawei products in stock.

Most of our technical engineers had work exprience in Huawei company,we can provide network design&planning,configration,troubleshooting,maintenance and training service in world wide.