Active Member
|
[China]
Address: B-1906,Zhantao-Tech mansion ,Minzhi road 1079,longhua Dis,shenzhen 518110 China
Contact name:Leo yang
Uonel Co.Limtied |
|
|
The LOA board supports functions and features such as wavelength tunable, OTN functions, and ESC.
For detailed functions and features, refer to Table 1.
| Function and Feature | Description | ||
|---|---|---|---|
| Basic function | LOA converts signals as follows:
Supports hybrid transmission of signals at a rate of 4.25 Gibt/s or lower, but does not support hybrid transmission of FC800/FICON8G/Infiniband 5G signals. The total rate of signals received at the client side cannot exceed 10 Gbit/s. | ||
| Client-side service type | FE: Ethernet service at a rate of 125 Mbit/s GE: Ethernet service at a rate of 1.25 Gbit/s. Supports GE optical signals and GE electrical signals. 10GE LAN: Ethernet service at a rate of 10.31 Gbit/s STM-1/OC-3: SDH/SONET service at a rate of 155.52 Mbit/s STM-4/OC-12: SDH/SONET service at a rate of 622.08 Mbit/s STM-16/OC-48: SDH/SONET service at a rate of 2.5 Gbit/s FC100: SAN service at a rate of 1.06 Gbit/s FC200: SAN service at a rate of 2.12 Gbit/s FC400: SAN service at a rate of 4.25 Gbit/s FC800: SAN service at a rate of 8.5 Gbit/s FC1200: SAN service at a rate of 10.51 Gbit/s FICON4G: SAN service at a rate of 4.25 Gbit/s FICON8G: SAN service at a rate of 8.5 Gbit/s FICON10G: SAN service at a rate of 10.51 Gbit/s Infiniband 2.5G: SAN service at a rate of 2.5 Gbit/s Infiniband 5G: SAN service at a rate of 5 Gbit/s ESCON: SAN service at a rate of 200 Mbit/s FICON: SAN service at a rate of 1.06 Gbit/s FICON Express: SAN service at a rate of 2.12 Gbit/s FDDI: SAN service at a rate of 125 Mbit/s HD-SDI: Bit-serial digital interface for high-definition television systems at a rate of 1.49 Gbit/s HD-SDIRBR: Bit-serial digital interface for high-definition television systems at a rate of 1.49/1.001 Gbit/s OTU1: OTN service at a rate of 2.67 Gbit/s SDI: Serial digital interface at a rate of 270 Mbit/s DVB-ASI: Video service at a rate of 270 Mbit/s 3G-SDI: Video service at a rate of 2.97 Gbit/s 3G-SDIRBR: Video service at a rate of 2.97/1.001 Gbit/s NOTE: The LOA board supports both GE electrical signal and GE optical signal. For GE electrical signal transmission, it is recommended that the board be equipped with at most two GE electrical modules to facilitate fiber routing. The LOA board supports access of SDI, HD-SDI, HD-SDIRBR, 3G-SDI, 3G-SDIRBR, and DVB-ASI electrical signals. When the board is used to accept these electrical signals, a digital video O/E converter must be used for O/E or E/O conversion and the optical module of the converter must agree with the board optical module specifications. The digital video O/E converter is a third-party device. Customers can purchase a digital video O/E converter by themselves. The FICON4G service and the FC400 service are processed identically. For the FICON4G service, you can configure it as the FC400 service on the U2000. | ||
| OTN function |
| ||
| WDM specification | Supports ITU-T G.694.1-compliant DWDM specifications. | ||
| Tunable wavelength function | Supports tunable wavelength optical modules that provide for 80 wavelengths tunable in the C band with 50 GHz channel spacing. | ||
| ESC function | Supported | ||
| PRBS test function | Supports the PRBS function on the client and WDM sides. NOTE: The PRBS function on the client side is only supported when the
client-side service type is STM-1, STM-4, STM-16, OC-3, OC-12,
OC-48, or OTU1. | ||
| LPT function | The board supports the LPT function only when the client-side service type is GE/FE/10GE LAN. | ||
| FEC coding |
NOTE: Boards that use different FEC modes cannot interconnect with each
other. | ||
| Alarms and performance events monitoring |
| ||
| Regeneration board | The WDM-side signals from one LOA board can be regenerated by another TN12ND2/TN52ND2/TN53ND2/TN55NO2/TN53NQ2/TN54NQ2 board. | ||
| ALS function | Supports the ALS function on the client side when client services are non-OTN services. | ||
| Test frame | The board supports the test frame function only when the client-side service type is GE or FE. | ||
| Latency measurement | Supported | ||
| Optical-layer ASON | Supported | ||
| Electrical-layer ASON | Not supported | ||
| Protection scheme |
| ||
| Ethernet service mapping mode | Supports encapsulation of GE services in GE(GFP-T) and GE(TTT-GMP) modes. Supports encapsulation of 10GE LAN services in Bit Transparent Mapping(11.1G). | ||
| Ethernet port working mode |
| ||
| IEEE 1588v2 | Not Supported | ||
| Physical clock |
| ||
| Loopback | Channel Loopback | Inloop | Supported NOTE: For FC800/FICON8G/Infiniband 5G services, Inloop is not supported
only in ODUflex non-convergence mode
(Any->ODUflex->ODU2->OTU2). |
| Outloop | |||
| WDM side | Inloop | Not supported | |
| Outloop | Supported NOTE: It is supported only in FC800/FICON8G/FC1200/FICON10G/10GE LAN
services in ODU2 non-convergence mode (Any->ODU2->OTU2). | ||
| Client side | Inloop | Supported NOTE: Inloop is not supported in FC800/FICON8G /FC1200/FICON10G/10GE LAN
services. | |
| Outloop | |||
Protocols or standards compliance | Protocols or standards for transparent transmission (non-performance monitoring) | IEEE 802.3u IEEE 802.3z ITU-T G.707 ITU-T G.782 ITU-T G.783 GR-253-CORE Synchronous Optical Network (SONET) Transport Systems: Common Generic NCITS FIBRE CHANNEL PHYSICAL INTERFACES (FC-PI) NCITS FIBRE CHANNEL LINK SERVICES (FC-LS) NCITS FIBRE CHANNEL FRAMING AND SIGNALING-2 (FC-FS-2) NCITS FIBRE CHANNEL BACKBONE-3 (FC-BB-3) NCITS FIBRE CHANNEL SWITCH FABRIC-3 (FC-SW-3) NCITS FIBRE CHANNEL - PHYSICAL AND SIGNALING INTERFACE (FC-PH) NCITS FIBRE CHANNEL SINGLE-BYTE COMMAND CODE SETS-2 MAPPING PROTOCOL (FC-SB-2) SMPTE 292M Bit-Serial Digital Interface for High-Definition Television Systems ETSI TR 101 891 Professional Interfaces: Guidelines for the implementation and usage of the DVB Asynchronous Serial Interface (ASI) SMPTE 259M 10-Bit 4:2:2 Component and 4fsc Composite Digital Signals - Serial Digital Interface NCITS SBCON Single-Byte Command Code Sets CONnection architecture (SBCON) ANSI X3.139 Information Systems - Fiber Distributed Data Interface (FDDI) - Token Ring Media Access Control (MAC) ANSI X3.148 Information Systems - Fiber Distributed Data Interface (FDDI) - Token Ring Physical Layer Protocol (PHY) ANSI X3.166 Information Systems - Fiber Distributed Data Interface (FDDI) Physical Layer Medium Dependent (PDM) | |
Protocols or standards for service processing (performance monitoring) | ITU-T G.805 ITU-T G.806 ITU-T G.709 ITU-T G.872 ITU-T G.7710 ITU-T G.798 ITU-T G.874 ITU-T M.3100 ITU-T G.874.1 ITU-T G.875 ITU-T G.808.1 ITU-T G.841ITU-T G.8201 ITU-T G.694.1 | ||
Available variants of the TN11LOA board
| Variants | Client-side service type |
|---|---|
| 01 | FE, FDDI, GE, STM-1, STM-4, OC-3, OC-12, FC100, FICON, DVB-ASI, ESCON, SDI, HD-SDI, HD-SDIRBR, STM–16, OC-48, FC200, FICON Express, OTU1, 3G-SDI, 3G-SDIRBR, FC400, FICON4G, FC800, FICON8G |
| 02 | FE, FDDI, GE, STM-1, STM-4, OC-3, OC-12, FC100, FICON, DVB-ASI, ESCON, SDI, HD-SDI, HD-SDIRBR, STM–16, OC-48, FC200, FICON Express, OTU1, 3G-SDI, 3G-SDIRBR, FC400, FICON4G, FC800, FICON8G, FC1200, FICON10G, 10GE LAN, Infiniband 2.5G, Infiniband 5G |
| Board | WDM-Side Optical Module | Typical Power Consumption (W) | Maximum Power Consumptiona (W) |
|---|---|---|---|
| TN11LOA | 800 ps/nm-C Band (Odd & Even Wavelengths)-Fixed Wavelength-NRZ-PIN-XFP 10 Gbit/s Multirate-10 km-XFP 10 Gbit/s Multirate-40 km-XFP | 31.8 | 36 |
800 ps/nm-C Band-Tunable Wavelength-NRZ-PIN-XFP | 32.8 | 37 | |
| a: The maximum power consumption is the power consumed by the board when it works normally under the highest ambient temperature. | |||
Cargo will be delivered within 1 day after payment arrived. Tracking Number will be offered once delivery done.
| Delivery Options | Estimated Delivery Time |
|---|---|
 DHL | 3-5 business days |
 Fedex | 3-5 business days |
 By Sea | 10-20 business days |
Notice:
Above mentioned information are just for your reference only,we will keep you posted for the tracking delivery schedule.There are two delivery options available for by air and by sea:
Deliver to port:
Uonel is responsible for transporting goods to port. All
subsequent customs and transportation fees are the
responsibility of the buyer. Uonel will recommend trustworthy
local freight forwarders to you.Uonel can facilitate the progress
under buyer's permission and at buyer's expense.
Deliver to door:
Uonel will quote all destination charge prior once we have
confirmed order.
Uonel is responsible for transporting goods to door after you
have made the payment.
100% Low Price Guarantee:
Uonel provides
high-quality products at low wholesale prices
100% Quality Assurance:
All items are
ORIGINAL NEW and GENUINE only.
Free Technical Support:
Our FREE Huawei Expert Consultancy Support is over the phone, by chat, by email or by login remotely.
100% Money Back Guarantee:
You can contact our customer service team to exchange or return any
product that you bought from us.
Flexible Secure Payment & Shipment:
Verified
authorization: Mcafee Secure, VeriSign Secured
Return Material Authorization (RMA) Process
Standard Hardware Warranty Policy:
Original new sealed Huawei product: 1 Year
The Support Contacts:
If your Huawei products failed, you must contact your sales representative to verify product failure. If the problem still can't correct by remote support methods i.e. email or phone support, the RMA procedure will issue.
Uonel is one of the biggest Huawei Network Hardware distributor in china, founded in 2008. We are a global provider of netwotking products with more than 5000 customers.
We provide original new Huawei Routers,Switches,Firewalls,Wireless APs & controllers,OLTs,GPON modems,optical transceivers.Our company have more than $5million Huawei products in stock.
Most of our technical engineers had work exprience in Huawei company,we can provide network design&planning,configration,troubleshooting,maintenance and training service in world wide.
