Home Companies Uonel Co.Limtied

OptiX OSN 9800 TN97OAU2 Extended C-band optical booster unit with pump protection-- OSN9800 UPS

Uonel Co.Limtied
Active Member

Contact Us

[China] country

Address: B-1906,Zhantao-Tech mansion ,Minzhi road 1079,longhua Dis,shenzhen 518110 China

Contact name:Leo yang

Inquir Now

Uonel Co.Limtied

OptiX OSN 9800 TN97OAU2 Extended C-band optical booster unit with pump protection-- OSN9800 UPS

Country/Region china
City & Province shenzhen
InquireNow

Product Details

Contact Us

  

 

 

Functions and Features

The OAU2 board amplifies Extend C-band optical signals and supports in-service optical performance monitoring, gain locking, and transient state control.

Table 1 describes the functions and features of the OAU2 board.

Table 1 Functions and features of the OAU2 board
Function and FeatureDescription
Basic functionsOAU202: Amplifies the power of Extend C-band optical signals. This board supports wavelengths within the 1528.8-1567.6 nm range.
Gain adjustingGain can be adjusted continuously from the minimum to the maximum. the range is from 18dB to 23dB.
In-service optical performance monitoring

Provides an in-service monitoring port (MON). This port connects to an optical spectrum analyzer or spectrum analyzer unit to monitor the spectrum and optical performance of the multiplexed signal without affecting traffic.

Gain locking

The EDFA inside the board has the gain lock function. Adding or dropping one or more channels or optical signal fluctuation does not affect the signal gain of other channels.

Working mode

Supports Gain locking mode, Power locking mode and APC mode.

  • The gain locking mode applies to the scenario where all wavelengths of the added and dropped services are compensated. In this scenario, an OAU2 board is connected to the multiplexer and demultiplexer boards.
  • The power locking mode applies to the dummy light scenario where the OAU2 board is used as the light source. The optical power can be gradually increased, and the OAU2 board has light output if no light input is present.
  • The APC mode applies to the submarine line side. the OAU2 board supports gradual increase of the optical power and has no light output if no light input is present.
NOTE:
After being powered on, a TN97OAU202 board works in APC mode and has no light output by default. To enable the TN97OAU202 board to output light, set the locked optical power and turn on the pump card laser.
Transient control functionThe EDFA inside the board has the transient control function. When channels are added or dropped, the board can suppress the fluctuation of the optical power in the path so as to implement the smooth upgrading and expansion.
NOTE:

This function is supported only when a board works in gain locking mode.

Alarms and performance events monitoring
  • Detects and reports the optical power.
  • Monitors the temperature of the pump laser.
  • Detects the pump driving current, back facet current, pump cooling current, temperature of the pump laser and the ambient temperature of the board.
  • Checks and reports the working status of the pump card.
protection
  • Provides redundancy protection for secondary power supplies.
  • Provides redundancy protection for pump cards.
Online replacement of a pump card

When a pump card works properly, you can replace a faulty pump card without interrupting services.

 

OAU2 Specifications

Specifications include optical specifications, dimensions, weight, and power consumption.

Optical Specifications

Table 1 list the optical specifications of the OAU2 board.

Table 1 interface parameter specifications of the TN97OAU202 board
ParametersUnitSpecifications
Operating wavelength rangenm1528.8 to 1567.6
Nominal input power rangedBm-24 to +1.5
Nominal out power rangedBm-1 to +19.5
EDFA power mode out power rangedBm
Power lock mode:
  • 1 to 17.5 (no light input)
  • 1 to 19.5( input light power≥target setting out power-26dB )
APC mode:
  • 1 to 19.5( input light power≥target setting out power-26dB )
Gain rangedB18 to 23
Noise figure (NF)dB

≤7, @Gain 18dB

≤6.5, @Gain 20dB

≤5.5, @Gain 23dB

Gain flatnessdB<2.0
Pump leakage at input enddBm<-30
Pump leakage at output enddBm<-20
Return loss at input enddB>40
Return loss at output enddB>40
Maximum reflectance tolerable at inputdB-27
Maximum reflectance tolerable at outputdB-27
Polarization dependent gain (PDG)dB<0.5
Polarization Mode Dispersion (PMD)ps<0.5
VI-VOInherent insertion lossdB≤1.5
Dynamic attenuation rangedB1.5 to 15
Adjustment accuracydB≤1

Mechanical Specifications

  • Dimensions of front panel (H x W x D): 264.6 mm (10.4 in.) x 50.8 mm (2.0 in.) x 220 mm (8.7 in.)
  • Weight: 2.25 kg(4.95 lb.)

Power Consumption

BoardTypical Power Consumption (W)Maximum Power Consumptiona (W)a
TN97OAU2023747
a: The maximum power consumption is the power consumed by the board when it works normally under the highest ambient temperature.
         
Delivery

Delivery OptionsEstimated Delivery Time
DHL3-5 business days
 Fedex3-5 business days
 By Sea10-20 business days

Notice:

 

Above mentioned information are just for your reference only,we will keep you posted for the tracking delivery schedule.There are two delivery options available for by air and by sea:

 

Deliver to port:

 

Uonel is responsible for transporting goods to port. All subsequent customs and transportation fees are the
responsibility of the buyer. Uonel will recommend trustworthy local freight forwarders to you.Uonel can facilitate the progress under buyer's permission and at buyer's expense.

 

Deliver to door:

 

Uonel will quote all destination charge prior once we have confirmed order.
Uonel is responsible for transporting goods to door after you have made the payment.

Warranty

   100% Low Price Guarantee:
              Uonel provides high-quality products at low wholesale prices


   100% Quality Assurance:
              All items are ORIGINAL NEW  and GENUINE only.
                    


   Free  Technical Support:

              Our FREE  Expert Consultancy Support is over the phone, by chat, by email or by login remotely.


  100% Money Back Guarantee:
             You can contact our customer service team to exchange or return any product that you bought from us.


  Flexible Secure Payment & Shipment:
             Verified authorization: Mcafee Secure, VeriSign Secured

Return Material Authorization (RMA) Process

  

Standard Hardware Warranty Policy:

 

Original new sealed  product: 1 Year

  

The Support Contacts:

  

If your  products failed, you must contact your sales representative to verify product failure. If the problem still can't correct by remote support methods i.e. email or phone support, the RMA procedure will issue.

Company Profile

Uonel is one of the biggest Network Hardware distributor in china, founded in 2008. We are a global provider of netwotking  products with more than 5000 customers.

We provide original new Routers,Switches,Firewalls,Wireless APs & controllers,OLTs,GPON modems,optical transceivers.Our company have more than $5million products in stock.

Most of our technical engineers had work exprience in company,we can provide network design&planning,configration,troubleshooting,maintenance and training service in world wide.

 

 

 













Hot Products

Contact Us Functions and Features The FIU board multiplexes and demultiplexes signals, and monitors ...
Contact Us Functions and Features The FIU board multiplexes and demultiplexes signals, and monitors ...
Contact Us Functions and Features The MD2 board supports wavelength multiplexing and demultiplexing ...
Contact Us Functions and Features The MD2 board supports wavelength multiplexing and demultiplexing ...
Contact Us Functions and Features The OAU2 board amplifies Extend C-band optical signals and ...
Contact Us Functions and Features The OAU2 board amplifies Extend C-band optical signals and ...