2000 M/Min Seamless Breaster Roller
2000 M/Min Seamless Breaster Roller Introduce
Usually, the breast wheel is the first cylinder on the paper
machine and is the beginning part of the screen. One of its
functions is to support the forming wire. The forming net changes
direction on the breast wheel. After passing the breast wheel, the
non-working surface of the forming net becomes the working surface.
In many cases, the breast roller is also a dehydrating element on
the screen, and the pulp from the Internet can remove part or most
of the water on the breast wheel.
The breast wheel is a tube rolling structure, with sufficient
rigidity and minimum deflection to prevent the copper mesh from
wrinkling. In order to reduce the load on the chest wheel driven by
the copper mesh, the weight of the chest wheel should be light.
Generally, there is no medium-to-high chest mixing for small and
medium-sized low-speed paper machines, and the chest rolling of
large high-speed paper machines is slightly medium-high.
2000 M/Min Seamless Breaster Roller Feature
In order to prevent the fiber from entering between the breast
roller and the copper mesh, the roller surface is equipped with a
plastic or wooden scraper to clean the roller surface, and a water
spray tube is also installed between the breast roller and the
lower lip to clean the roller surface. Usually, an extension plate
is provided on the back of the scraper, and the white water removed
by the net is introduced into the first white water tray.
breast roll also has a dehydration effect, and the amount of
dehydration can be controlled by the dots of the pulp flow. If the
pulp flow directly falls on the breast roll, a large amount of
water can be removed, which has a partial shaping effect. If the
pulp stream is sprayed on the forming plate, the dehydration effect
on the breast roll is very small, and the forming of the paper
sheet is controlled by the table roll or the dehydration plate.
A modern high-speed paper machine that uses free pulp to produce
thin paper, using water-absorbing breast rolls for intense
dehydration. In this case, most of the water is removed by the
breast roller. The dehydration mechanism of breast roller is
similar to that of table roller.
2000 M/Min Seamless Breaster Roller Data Sheet
Manufacturing standard | Shell in seamless steel pipe or plate bended Cast iron hubs cast steel or alloy steel journals Roll face rubber covered cast iron bearing housings Grease lubrication |
Optional | Stainless steel material bearing housing oil lubrication Roll face covered by TowEwooDWARD rubber Loose rope pully or grooved |
Supply limits | Diameter: 300 -1500 mm Face length: 12000 mm Working speed: max up to 2000 m/min |
2000 M/Min Seamless Breaster Roller Pictures