Diameter | 100-580mm |
Max diamater | 160-680mm |
Flange outer diameter | 120-640mm |
Number of flexur | 1-3 |
3,Industrial Rubber Air Spring Air Tire Usage
It is mainly used in the papermaking machinery industry. It is used
for stroke adjustment and tension control of calibrators,
calenders, presses, scrapers, screens and other parts. In addition,
it is also used in construction, chemical, and machinery
industries. Seismic, seismic isolation and stroke control
4 ,Industrial Rubber Air Spring Air Tire Feature:
Air springs have non-linear characteristics, and their stiffness
changes with load, so their natural vibration frequency is almost
unchanged under any load, so that the spring device has almost
constant characteristics, and it has a good ability to absorb high
frequency vibration and sound insulation. It can bear axial load
and radial load at the same time. Through internal pressure
adjustment, it can also get different bearing capacity. Therefore,
it can be applied to various load requirements.
During the effective stroke of the air spring, the stiffness,
height, cavity volume, and bearing capacity of the air spring are
adjusted by increasing or decreasing the inflation pressure. At the
same time, its stiffness, height, cavity internal volume, and
bearing capacity will change smoothly and periodically with the
increase and decrease of the load, thereby achieving flexible
transmission of bearing capacity, effective adjustment of stroke,
and vibration amplitude and vibration load Efficient control. An
air chamber can also be added for automatic adjustment.
5,1,Industrial Rubber Air Spring Air Tire yInstructions for use
It has a low installation height and is very compact.
Although it has a large load and a large stroke, it is possible to
design a compact actuator with a low installation height.
Refueling, no maintenance required
Because there is no rotating part, a reactor that does not require
refueling and maintenance can be obtained.