Double Tooth Roller Crusher product description
Double-toothed roll crusher is equipped
with two toothed rolls, and the toothed roll surface is divided
into large (small) wolf teeth, special teeth for cutting coke,
annular teeth, straight teeth, large plate teeth, etc. It is
suitable for the finished product size requirement of 10-300mm, and
the requirement of medium or coarse crushing occasions with fewer
powders and more particles. Such as limestone, silicon metal,
basalt, construction waste (concrete), quicklime, coal, coke, clay,
chemical raw materials. It can be widely used in mining,
thermoelectricity, metallurgy, chemical industry, building
materials and other industries, and is characterized by low
maintenance cost, no requirement for water, reliable performance,
small power consumption, less dust, low noise and so on.
According to the user requirements are
divided into triangle belt and coupling drive (hard link) two ways.
This equipment can be changed to diesel engine or gasoline engine
as power in case of no electricity in the mine.
Double Tooth Roller Crusher working principle
Double-tooth roll crusher utilizes two
wear-resistant crushing rolls, which rotate relative to each other
to generate high squeezing force to crush the materials. After the
materials enter the gap between the two tooth rolls (V-shaped
crushing chamber), they are subjected to squeezing force and shear
force by the relative rotation of the two tooth rolls, and then
under the squeezing, shearing and grinding, the materials are
crushed into the required size and then discharged by the discharge
port.Double Tooth Roller Crusher Technical Parameters
number | Specification | Feed size (mm) | Output granularity tunable(mm) | production capacity (t/h) | Motor power Kw | Protection mode | transmission method |
1 | 2PG-10CT | <120 | 10-50 | 2-20 | 6-8 | sprung | triangle maybe coupling |
2 | 2PG-30CT | <120 | 10-50 | 6-40 | 8-15 |
3 | 2PG-50CT | <200 | 10-60 | 10-80 | 22-37 |
4 | 2PG-60CT | <300 | 10-80 | 20-150 | 30-45 |
5 | 2PG-80CT(Y) | <400 | 10-100 | 30-200 | 60-75 | sprung or hydraulically |
6 | 2PG-100CT(Y) | <300 | 10-90 | 40-280 | 75-90 |
7 | 2PG-120CT(Y) | <400 | 10-120 | 50-350 | 90-110 |
8 | 2PG-150CT(Y) | <600 | 10-150 | 65-450 | 110-150 |
9 | 2PG-220CT(Y) | <800 | 10-180 | 80-600 | 150-180 |
10 | 2PG-350CT(Y) | <900 | 10-200 | 90-800 | 220-280 |
11 | 2PG-500CT(Y) | <1200 | 20-300 | 200-2500 | 250-320 |
12 | 2PG-800CT(Y) | <1200 | 20-300 | 300-3500 | 320-400 |
13 | 2PG-1200CT(Y) | <1200 | 20-300 | 400-5000 | 600-800 |