Active Member
|
[China]
Address: Room 2004, Expo Center, Donfeng Road, Jinshui District, Zhengzhou City, Henan Province, China
Contact name:Lisa
Zhengzhou Huitong Pipeline Equipment Co.,Ltd. |
|
|
Nitronic®60, or N-60 is known for its excellent galling resistance, even at elevated temperatures. The additions of 4% silicon and 8% manganese inhibit wear, galling, and fretting. It is commonly used for various fasteners and pins that require strength and resistance to galling. It maintains decent strength up to temperatures of 1800°F and has oxidation resistance similar to that of 309 stainless steel. The general corrosion resistance is between that of 304 and 316 stainless steel.
| Ni | Cr | Mn | Si | C | N | S | P | Fe | |
| MIN | 8.0 | 16.0 | 7.0 | 3.5 | - | 0.08 | - | - | - |
| MAX | 9.0 | 18.0 | 9.0 | 4.5 | 0.10 | 0.18 | 0.03 | 0.06 | Balance |
Nitronic®60 Round Bar
N-60 Stainless
· Wear and galling resistant alloy
· Fasteners
· Pins and bushings
· Wear rails
· Roller bearings
· Pump components
Density: 0.275 lb/inch3
Electrical Resistivity: 589 ohm circ-mil/ft
| Temperature, °F | 70 | 200 | 400 | 600 | 800 | 1000 | 1200 | 1400 | 1600 | 1800 |
| Coefficient of Thermal Expansion, in/in°F x 10-6 | - | 8.8 | 9.2 | 9.6 | 9.8 | 10.0 | 10.3 | 10.5 | 10.7 | 11.0 |
| Modulus of Elasticity, psi X 106 STA | - | 26.2 | - | - | - | - | - | - | - | - |
* 70°F to indicated temperature.
Minimum Specified Properties, ASTM A 276 Bar
| Ultimate Tensile Strength, ksi | 95 |
| 0.2% Yield Strength, ksi | 50 |
| Elongation, % | 35 |
| Reduction of Area, % | 55 |
| Hardness MAX, Brinell | 241 |
Typical Tensile Properties Annealed Bar 3/4 - 1"
| Temperature, °F | 68 | 200 | 400 | 600 | 800 | 1000 | 1200 | 1400 | 1600 |
| Ultimate Tensile Strength, ksi | 106.5 | 98.2 | 84.4 | 80.5 | 78.3 | 75.4 | 66.6 | 49.8 | 30.2 |
| 0.2% Yield Strength, ksi | 56.5 | 44.4 | 32.8 | 29.7 | 29.0 | 28.0 | 28.1 | 25.3 | 16.4 |
| Elongation, 2% | 61.7 | 63.3 | 64.0 | 59.6 | 65.5 | 52.2 | 48.2 | 47.1 | 72.8 |
Nitronic®is a registered trademark of AK Steel.
We can provide Nitronic 60 material in the form of flange, fittings, pipes, fasteners.
