Henan Hongtai Kiln Refractory Co.,Ltd. |
Verified Suppliers
|
|
Chrome corundum refractory brick used for garbage incinerator
Chrome corundum refractory brick is alumina - chrome oxide as the main raw material production of high-performance chrome corundum brick, has the characteristics of high refractoriness, great strength, good thermal shock stability, strong ability to resist erosion. In use, the scouring resistance, wear resistance, resistance to flake structure, has been in metallurgy, glass, carbon black and the garbage incinerator, has obtained the good using effect. Chromium corundum brick raw material is used by the ratio of alumina and chromium oxide according to certain proportion, go through high temperature melting synthesis of a solid solution. Using special refractory production technology made of refractory brick, can improve internal quality of the product, improve the high temperature performance of products.
Chrome corundum refractory brick used for garbage incinerator
The chrome corundum brick produced by our factory has excellent
performance and can reach the quality level of similar foreign
products.
1 Fire resistance
It can be seen from the binary phase diagram of Al2O3-Cr203 that
A1203 and Cr203 can form a continuous drawing solution without
eutectic matter. Therefore, the addition of Cr2O3 to the
high-purity corundum material, regardless of the amount of
addition, not only does not reduce the fire resistance of the
material, but also improves the fire resistance of the material.
The refractory degree of chrome corundum brick (>1790 ° C) and
the load softening temperature (>1700 ° C) are superior to high
purity corundum products.
2 Product strength
The normal temperature compressive strength of high-purity corundum
bricks is generally 70-100 MPa, and the normal-temperature
compressive strength of high-performance chrome corundum bricks is
generally >150 MPa, and its strength is significantly higher
than that of corundum bricks. This is because during the firing
process, between the particles and the particles, between the
particles and the fine powder, the Al2O3-Cr203 solid solution is
formed between the fine powder and the fine powder, and the solid
solution connects the particles and the fine powder like a bridge.
Together, the strength of the material is greatly increased.
3 Thermal shock system
According to the data, Cr203 is added to corundum. When the content
of Cr203 is 10%-66%, the thermal shock stability of the material
decreases with the increase of Cr203 content, that is, the chrome
corundum brick with low content has better thermal shock stability.
Chrome corundum brick with high Cr203 content. The high-performance
chrome corundum brick Cr203 content promoted and applied by our
factory is between 12% and 20%, and its thermal shock stability is
improved compared with corundum brick; especially the AKZ-type
chrome corundum produced by adding a small amount of phase-change
additive. Brick, thermal shock stability is better.
4 anti-slag ability
Cr2O3 or Cr2O3-containing refractories have good corrosion
resistance to steel slag, colored smelting slag, coal gasifier
slag, oil gasification slag and various glass melts. The viscosity
of the liquid phase formed by the reaction of Cr2O3 melt or Cr2O3
with slag is greater than that of other low-melting materials,
which prevents the slag from penetrating into the interior of the
brick body along the capillary pores, avoiding the formation of
metamorphic layers and causing structural spalling.
Chrome corundum refractory brick used for garbage incinerator
1. The refractory properties of chrome corundum refractory
brick for garbage incinerator
In high purity corundum material add Cr2O3, no matter how much the
amount, not only will not reduce the fire performance of
materials,can make refractory performance of material improved.
2. The strength of chrome corundum refractory brick for
garbage incinerator
Compressive strength of high purity corundum brick at room
temperature is 70 ~ 100 MPa commonly, room temperature compressive
strength of high performance chromium corundum brick is generally
larger 150 MPa, the intensity is significantly higher than the
corundum brick. This is because the products in the process of
burning, between particles and fine powder, between powder and
powder are formed Al2O3 - Cr2O3 solid solution, calcium solid
solution like bridge connect fine powder with particles together,
make the strength of the material is greatly increased.
3. Thermal shock resistance of chrome corundum refractory
brick for garbage incinerator
Add Cr2O3 in corundum, when Cr2O3 content is 10% ~ 66%, material of
thermal shock resistance decreased with increasing content of
Cr2O3, namely the Cr2O3 content low chrome corundum brick, the
thermal shock stability is better than Cr2O3 content high chrome
corundum brick.
Chrome corundum refractory brick used for garbage incinerator
Item | Chrome-Corundum brick | Chrome-Corundum brick | Chrome-Corundum brick |
Cr2O3 % | ≥60 | ≥30 | ≥12 |
Al2O3 % | ≤38 | ≤68 | ≤80 |
Fe2O3 % | ≤0.2 | ≤0.2 | ≤0.5 |
Apparent porosity % | ≤14 | ≤16 | ≤18 |
Bulk density g/cm3 | ≥3.63 | ≥3.53 | ≥3.3 |
Cold Crushing Strength Mpa | ≥130 | ≥130 | ≥120 |
Refractoriness under load (0.2MPa,0.6%) ℃ | ≥1700 | ≥1700 | ≥1700 |
Reheating linear change rate(1600℃×3h) % | ±0.2 | ±0.2 | ±0.2 |
Chrome corundum refractory brick used for garbage incinerator
For use in the iron and steel industry, chrome corundum brick material is above double longer than service life extended of corundum material, such as ladle air brick, etc. For use in nonferrous smelting industry, the wear resistance and erosion resistance of chrome corundum brick is superior to other bricks.
Used in the steel industry, the chrome corundum refractory brick
has more than doubled the service life of corundum refractory
bricks, such as ladle ventilated bricks; in the non-ferrous
smelting industry, the wear resistance and corrosion resistance of
chrome corundum refractory bricks are significantly better than
other bricks; In the carbon black industry, the use of chrome
corundum refractory bricks in carbon black plants is twice as long as that of
corundum bricks used under the same conditions. The AK-type chrome
corundum brick produced this time is used in the carbon black
reaction furnace of the carbon black plant, and the service life
has exceeded that of corundum refractory brick.
In the garbage incinerator, large and medium-sized fertilizer
plants are characterized by long-term high temperature (1350~1450
°C), high pressure, (3.1-8.53 MPa), strong reducing atmosphere
(CO+H2+CH4) and high gas flow rate (about 10m·s-1), the erosion and
damage to the lining refractory brick is more serious, so the
lining refractory brick is more demanding. High-performance
chrome corundum refractory bricks have high density and high strength, and are more resistant
to airflow and wear than corundum bricks. Introducing Cr2O3 in
corundum bricks to change the intrinsic quality of the products, so
that the erosion resistance and permeability resistance of the
bricks are significantly improved. The use of chrome corundum refractory bricks on the gasifier can improve the service life of the
gasifier.
Chrome corundum refractory brick used for garbage incinerator
Chrome Corundum refractory Brick Quality Control
Starting from the raw material into factory, Every production
process of our product should through strict quality control, In
addition to rigorous process control, our quality control team
inspects the output of each process to ensure material quality and
consistency. We do our best to supply the products with best
quality to satisfy our customers.
Chrome Corundum refractory Brick Raw Material Selection:
To ensure the quality of our raw materials, we only purchase our
raw materials from our long-term trusted suppliers. With every
purchase, the raw material must be passed 2 times inspecition, 1
time at our supplier’s site. a second inspection on the batch after
the material arrived to our factory. Each time raw materials enter
our facility, they are inspected again prior to being accepted.
Chrome Corundum refractory Brick advantage
1. Scale: Four factories and one International trade company.
2. History: Specialized in manufacturing refractory products about
20 years.
3. Capacity: 6000 ton/month.
4. Process equipment: international advanced automatic batching
system and brick machinery equipment.
5. Certification: IS0 certificate,LIRR test, BV and TUV certificate
is allowable.
6. Main products: Refractory brick; raw refractory material,
refractory brick, refractory castable, etc.
7.Trading nation: More than 20 countries, such as Thailand,
Indonesia, Pakistan, Saudi Arabia, South Africa, Turkey, Iran, Iraq
and so on.
Chrome Corundum refractory Brick Packaging & Shipping
1.Strong packing will protect the goods from any possible damage
during transit.
2.Solid packing and overall stuffing can prevent the cases from
vibration and jarring.
3.We must take necessary precaution that the packing can protect
goods from pilferage or rain.
4.We can confirm that we take every possible precaution to ensure
that our products reach our customers all over the world in prime
conditon.
Hongtai services
1.ISO 9001 Certificate;
2.Construction instructions and designing services are provided by
our professional technicists.
3.Inspectors make sure the semi-finished product standard in
process and finished product perfect.
4.Customize size are welcome,OEM,ODM acceptable
5.Professional chemical analysts check all the material before
production.
6.Best after-sale-service.