Steel Ladle Necessity Low Melting Point Sintered Calcium Aluminate with CrO Content -

Sintered calcium aluminate for steel plant to reduce the impurity of the steel water is produced by burning the raw materials of high grade crude aluminous bauxite and limestone in arc-furnace kiln. It is mainly used in refining ladle to remove the sulfide impurities from steel liquid and keeping good fluidity of slag. 

From the production form,the calcium aluminate could devide into 3 type:Pre-melting (fused / Flux)type, sintered type, mixed type calcium aluminate.

The composition of sintered type calcium aluminate is more uniform and stable than mixed type, melting speed is faster, but the cost is relatively increased, and because sintered slag density small porosity, easy to cause refining process suction.(sintering type calcium aluminate refining slag)

Features of Low melting point sintered calcium aluminate for steel ladle/steel factory: 

The oxidization of the slag after tapping of the converter is very high, w (FeO + MnO) = 25 % ~ 40%. After the slag reduction treatment, w(FeO + MnO) in the slag sharply decreased. After the modification, the slag w(FeO + MnO) in the RH treatment is 0.72 % ~ 5.38 %, and most of the cases can be controlled below 3%, which creates conditions for deoxidation and desulfurization of molten steel.
Viscosity has a very close relationship with mass transfer and heat transfer rate between slag and molten steel, affecting the rate of metallurgical reaction. When the CaO content in the slag is too high, the precipitation of the solid phase in the slag causes the slag viscosity to increase and the fluidity deteriorates. However, since the refining slag contains a large amount of Al 2 O 3 , the problem of slag fluidity is effectively solved.
The binary alkalinity of the refining slag is very high, w(CaO) / w( SiO2) = 5 to 11. The ability of ladle slag to absorb Al2O3 inclusions is maintained at a high level, while secondary oxidation caused by SiO2 is prevented, and silicon back and sulfur recovery are suppressed.

Low melting point sintered calcium aluminate for steel ladle/steel factory

Low melting point sintered calcium aluminate for steel ladle/steel factory

1.on wooden pallets with plastic cover: wooden pallet size :930*930 or 1000*1000mm,

2.Load weight of each pallet: 1.5-2.0 tons,

3.230*114*65mm:512PCS/Pallet, 230*114*75mm:448PCS/Pallet.

Shipping :

1.Our packaging is as per customer’s request
2.Normal goods delivered by sea transport
3.Sample shipping by express
4.We will shipping and delivery goods timely, quanlity and quantity guaranteed, and also in accordance with the contract and customer's requirment completely.

Payment Item :

1. Payment: T/T, Western Union,LC; Usually 30% deposits,70% balance before delivery or negotiations to solve.
2. MOQ: Usually 1Tons
3. Quality Warranty: 1 years

Delivery time :

1.Stocks:Within 5-7 days after receive the deposit.

2.Customization:Within 15-30 days after receive the deposite.

Low melting point sintered calcium aluminate for steel ladle/steel factory

Henan Hongtai Kiln Refractory Co., Ltd. is established in 2002, located in Xinmi City, 40kilometers southwest of Zhengzhou City in Henan Province, close to Jingguang, Longhai railway lines, with road transport facilities. Rich resources of Refractory materials, adequate and qualified fuel in this area, provide unique conditions for refractory production, shipping and refractory industry development. 

Main products include different kinds of refractory brick:Fire Clay Brick, High Alumina Brick, Light Weight Insulating Brick,Corundum Brick,Mullite Brick,AZS Bricks, Refractory Balls ,Refractory concrete,refractory castable,Acid resistant brick etc.They are widely used in Iron and steel, Nonferrous metals, Building materials(Cement,Glass,Ceramic), Petrochemical, Energy & Incineration etc industries. Our products have been exported to India,Turkey,Vietnam,Malaysia and Kazakhstan etc.
“Science-Technology Innovation, Cooperation for Win-Win”, Henan Lite Refractory Material Co., Ltd will do the best for the clients in a timely and effective way. 

Low melting point sintered calcium aluminate for steel ladle/steel factory

Service we can provide:

1. Quick and Positive reply after receiving your inquiry.
2. Free samples before shippment.
3. Quality control before and during shipment.
4. Loading photos as required.
5. Pompt shipment with right shipping line.
6. SGS and BV certification as required.
7. Packing according to Clients' requirement. 

1.What's your payment terms?

Various payment will be supported
2.What's your delivery time?
Usually within 15-30 days after receive the deposit.
3.How about the packing?
25 kg/bag,outer woven bags with inner plastic lining.
4.What documents you provide?
Usually, we provide Commercial Invoice, Packing List, Bill of lading, COA , TDS. etc.If your markets have any special requirements, let us know.
5.How about the validity of the products?
According to the products you ordered.
6.What is loading port?
Usually isTianjin, Shanghai or Qingdao.

Contact person:Marina Ma

Tel:+86 18838001797

Wechat/Whats app:+86 18838001797

Viber/Telegram:+86 18838001797

Skype:Marina Ma

QQ:2262521614 

Email:sales04(at)firebricks-supplies.com