Home Companies Shenzhen Ariza Electronic Co.,Ltd.

Tuya Wifi Smart Carbon Monoxide And Smoke Alarm 2 In 1 Detector Sensor

Active Member

Contact Us

[China]

Address: The 2nd floor of B1 building,Xinfu industry zone,Chongqing Rd.,Heping village,Fuyong Town,Bao'an district,Shenzhen,China 518103

Contact name:Alisa

Shenzhen Ariza Electronic Co.,Ltd.

Tuya Wifi Smart Carbon Monoxide And Smoke Alarm 2 In 1 Detector Sensor

Country/Region	china
City & Province	shenzhen chongqing
Categories	Smoke Detector

Product Details

Tuya Wifi Smart Carbon Monoxide And Smoke Alarm 2 In 1 Detector Sensor

Faulty warning.

Low battery warning.

Hush function.

Manual Test / Auto-Reset.

Big test button for easy operation.

Low-power consumption design ,3years or 10 years can be custmized.

Dustproof, mothproof and anti-white light interference design.

Automatic calibration, guaranteeing accurate sensitivity.

Tuya WIFI APP control.

Specification

Product name	Tuya Wifi Smart Carbon Monoxide And Smoke Alarm
Audible alarm	Φ82*50.5mm
Dimension	Up to 40m²
Hush Time	Approx. 10minutes
Temperature	-10℃~+50℃,(≤95%RH non-condensing)
Humidity	≤95%RH non-condense
Battery	1.5V AA Alkaline battery
Operation Current	≤10uA
Alarm Sensitivity	0.1~0.2dB/m
Silence Time	Approx. 10 minutes

Installation Instructions

1. At first you should install an alarm in the bedroom and walkway.Ifthere are several bedrooms in the house,please install an alarm inevery bedroom .
2. Install an alarm above the stairway and on every floor of the house.

3. Smoke,heat and burning things will spread horizontally after rising tothe ceiling,so install the alarm in middle of the ceiling.
4. If the alarm can not be installed in the middle of the ceiling,install itkeeping 300mm away from the corners.
5. If the alarm is installed in the wall it should keep 100mm away fromthe ceiling.
6. If the length of the room or the hall is beyond 30foot,you need toinstall several alarms there.
7. When the wall or ceiling is slanting,the alarm needs to be installedminimum 500mm away from the highest wall or ceiling point in theroom.

Silence Mode

During the unit is alarming,youcanpush the test button,it will be paused the unit alarming for approx 10minutes.The red LED will flash once every 8 seconds,it indicates the smoke alarm device is running into the silence mode. The silence feature is to be used only when a known alarm condition,such as smoke from cooking activates the alarm.The smoke alarm devicewill automatically reset after approximately 10minutes,if after this period,particles of combustion are still present,the alarm will sound again.

CAUTION
Before using the alarm silence (silence),identify the source of the smoke and be certain a safe condition exists .

Maintenance and Cleaning

There are a few simple steps you need do to keep it working properly.
1. Test the alarm once a week.
2. Clean the alarm surface with a soft brush or cloth every month.
3. Do not paint the alarm. Paint will seal the vents and interfere with the sensor’s ability to detect smoke.
4. Never attempt to disassemble the alarm to clean inside.This will In addition to weekly testing, the alarm requires periodic cleaning to remove dust, dirt, and debris.Clean the alarm at least once a month to remove dust, dirt, or debris. Use a vacuum cleaner with the soft brush, vacuum all sides and covers of smoke alarm device. If there is a defective battery or other failures, you can refer to “Trouble shooting” for solution, if there are still failures during warranty, you can return to your retailer.

Replaced Battery

1. The low battery signal can last for maximum 30 days, please replace the batteries in time to keep it working properly.
2. Battery required: standard 1.5V AA batteries.
3. Acceptable brand: Duracell MN1500, Golden Peak LR6, GP GN15A, etc.
4. Correctly install the positive and negative poles of the battery (“+” & “-”)
5. Waste batteries should not be placed into any household waste or recycling bin as all of them have the potential to spark. Check with your Local Authority for recycling advice.

FAQ

Q: How can i place an order?
Please provide the details of your requirements as clear as possible. So we can send you the offer at the first time.
A: For designing or further discussion, it is better to contact us with Skype / email / phone, in case of any delays.

Q: How about the quality of the personal alarm ?

A:We produce every product with good quality materials and fully test three times before shippment. What is more, our quality

areapproved by CE RoHS SGS & FCC, IOS9001, BSCI.

Q: Can i have a sample order?

A: Yes, we welcome sample order to test and check quality. Mixed samples are acceptable.

Q:What is your terms of delivery?
A: We accept EXW, FOB, CFR, CIF, DDU, DDP, etc. You can choose the one which is the most convenient or cost effective for you.

Q: How do you ship the goods and how long does it take arrive?

A:We usually ship by DHL(3-5days), UPS(4-6days), Fedex(4-6days), TNT(4-6days), Air(7-10days), or by sea(25-30days)at your request.

Hot Products

Home Security Wireless Carbon Monoxide Alarm Detector With LED Display

Contact Us

Shenzhen Ariza Electronic Co.,Ltd.

Tuya Wifi Smart Carbon Monoxide And Smoke Alarm 2 In 1 Detector Sensor

Product Details

Hot Products

Home Security Wireless Carbon Monoxide Alarm Detector With LED Display

3 Years Battery Wireless Interconeted Smoke Alarms Detector Smok Alarm With ABS Material

TUV CE Led Smoke Detector Alarm 10 Years Battery Operated 85db Fire Smoke Alarm With Silence Button

Wireless Interconnected Smoke Alarm Detector Replaceable Battery Photoelectric Fire Alarm

Tuya Wifi Smart Carbon Monoxide And Smoke Alarm 2 In 1 Detector Sensor

White Wireless Smoke Alarms Detector Carbon Monoxide And Smoke Detector With AA Alkaline Battery