Active Member
|
[China]
Address: 广州市黄埔区大沙地东路403号B802房(仅限办公）
Contact name:Echo
Guangzhou Changfeng Steel Co., LTD |
|
|
Tempering High Carbon Alloy Steel 1.7225 / SAE4140 For Mechancial
Similar grades: DIN-1.7225, AISI-SAE4140, SCM440, GB-42CrMo
Introduction:
Grade 1.7225 / SAE4140 / SCM440 / 42CrMo steel belongs to the ultra-high strength steel, high strength and toughness, hardenability is better also, no obvious temper brittleness, conditioning treatment after repeated impact resistance, high fatigue limit and good low-temperature impact toughness.
Grade 1.7225 / SAE4140 / SCM440 / 42CrMo steel is suitable for large and medium sized plastic mold that requires certain strength and toughness.
Available size(mm):
| Flat Bar Size(mm) | Round bar Size(mm) | |||
| Thickness | Width | Length | Diameter | Length |
| 10-200 | 155-2200 | 2000-6000 | 20-200 | 3000-6000 |
Available shape:
Steel plate
Flat bar
Steel block
Round bar
Steel rod
Steel sheet
Features:
1, Good strength, hardenability and toughness.
2, High creep strength and long lasting strength under the high
temperature.
Chemical composition(%):
| C | Si | Mn | Cr | P | S | Mo |
| 0.38-0.45 | 0.17-0.37 | 0.50-0.80 | 0.90-1.20 | ≤0.035 | ≤0.035 | 0.15-0.25 |
Heat treatment:
| Quenching | Tempering | |||||
| Heating temperature/℃ | Cooling way | Hardness (HRC) | Tempering temperature/ºC | Cooling way | Hardness (HRC) | |
| 840-880 | Oil Cooling | ≥53 | 450-650 | Air cooling | 25-40 | |
Application:
Used in the manufacture of high strength, large cross-section forgings such as supercharger transmission gear,rear axle,hummar shank etc.
42CrMo has the characteristic of high strength, hardenability, good toughness, low deformation in quenching, high creep strength and endurance.
It can used in the manufacture requirements higher than 35Crmo steel strength and conditioning section more large forgings, such as locomotive traction with the big gear, supercharger drive gear, pressure vessel, rear axle, gear load connecting rod and a spring clip, can also be used to under 2000 m deep well of oil drill pipe joint and the fishing tool, and can be used for bending machine mould, etc.
Product pictures:
Our Mian Products:
| Hot sale products for hot/cold work mould Steel | |||||||||
| STANDARD/GRADE | Flat Bar Size(mm) | Round bar Size(mm) | Technics | ||||||
| DIN | AISM | JIS | GB(China) | Thickness | Width | Length | Diameter | Length | |
| 1.2311 | P20 | PDS-3 | 3Cr2Mo | 10-700 | 155-2200 | 2000-6000 | 20-200 | 2000-6000 | Forged, Hot Rolled |
| 1.2738 | P20+Ni | - | 3Cr2NiMnMo | 10-1100 | 155-2200 | 2000-6000 | 20-200 | 2000-6000 | |
| 1.2379 | D2 | SKD10 | SKD10 | 10-200 | 155-810 | 2000-6000 | 20-200 | 3000-6000 | |
| 1.2080 | D3 | SKD1 | 3Cr2Mo | 10-200 | 155-810 | 2000-6000 | 20-200 | 3000-6000 | |
| 1.2083 | 420 | - | 4Cr13 | 10-500 | 155-1200 | 2000-6000 | 20-300 | 3000-6000 | |
| 1.2344 | H13 | SKD61 | 4Cr5MoSiV1 | 10-500 | 155-1600 | 2000-6000 | 20-400 | 3000-6000 | |
| 1.2510 | O1 | SKS3 | 9CrWMn | 10-200 | 155-810 | 2000-6000 | 20-200 | 3000-6000 | |
| 1.7225 | SAE4140 | SCM440 | 42CrMo | 10-200 | 155-2200 | 2000-6000 | 20-200 | 3000-6000 | |
| 1.2010 | SAE1050 | S50C | 50# | 10-700 | 155-2200 | 3000-6000 | 10-300 | 3000-6000 | Hot Rolled |
| 1.1191 | SAE1045 | S45C | 45# | 10-700 | 155-2200 | 3000-6000 | 10-300 | 3000-6000 | |
