S50C/1.1210/SAE1050/50# plastic mould steel plate any sizes any
quantity
1 Introduction
SAE1050/1.1210/S50C/50#, A High strength medium tensile,low
hardenability and low-ductility carbon steel. Have no temper brittlenss and with
normal cutting performance. Usually used after annealing+queching
or normalizing.
2 Steel grades
Chinese | American | German | Japanese |
GB | AISI/SAE | DIN | JIS |
50# | 1050 | 1.1210 | S50C |
3 Chemical Composition (wt%)
Grades | C | Si | Mn | P | S | Cu | Ni | Cr |
S50C | 0.47-0.53 | 0.15-0.35 | 0.60-0.90 | ≤0.03 | ≤0.035 | ≤0.30 | ≤0.20 | ≤0.20 |
50# | 0.47-0.55 | 0.17-0.37 | 0.50-0.80 | ≤0.035 | / | ≤0.25 | ≤0.30 | ≤0.15 |
4 Available Sizes
steel plate | Thickness | 8-700mm |
Width | 1600-2400mm |
Length | 2200-5800mm |
flat bar | cutting width:155,205,255,310,360,410,460,510,560,610,710mm |
round bar | diameter | 10-350mm |
length | 4000-12000mm |
forged | thickness | 350-1000mm |
width | 800-1600mm |
length | 2000-6000mm |
5 Application
a For making injection plastic mould, mould frame and some
middle-range machine
b Various cold work die pads
c Drilling mold fixing plate
d Standard template material
6 Products Pictures
7 Company Profile
Guangzhou ChangFeng Steel Co., Ltd, is located in Guangzhou city,
it was established in 2012, and is an Professional import and
export company with ten years experience of selling special steel,
which mainly sells plastic die steel, hot work die steel, cold work
mould steel, alloy structural steel, bearing steel, tool steel,
stainless steel, carbon steel, etc.
We also act on behalf of exporting steels of mainly steel factories
in China, including Baogang group, Shagang group, Wenfeng group,
Xingcheng group, Dongte group, Daye and so on. We are full of
export experience to the market all over the word, such as America,
Germany, France, Italy, Turkey, Singapore, Thailand, Malaysia,
Vietnam, Taiwan, and Middle-East.
At the same time, We offer the seamless steel pipe, welded carbon
steel pipe, GI pipe, and special pipe. Fittings elbow, tee,
reducer, cap, lap joint, flanges etc...This is better for our
customer to buy the different products from China, while they are
saving their time, but they can enjoy in our best serves.