105C High Adhesion Hot Melt Adhesive Granules Middle Temperature

Grade:VF790

Product: Hot Melt Adhesive Resin For Aluminum Plastic Panel And Heat Insulation Panel

Descriptions

Hot melts are formulated with numerous thermoplastics, including ethyl vinyl acetate (EVA) for general purpose bonding, polyolefins for difficult-to-bond plastics, styrene block copolymers (SBC) for good low temperature flexibility, high elongation and improved heat resistance, polyamides for severe environments, and reactive urethanes and silicones for elevated temperature and/or high flexibility requirements. These thermoplastics are typically blended with a variety of other raw materials including tackifying resins, waxes, plasticizers, oils, fillers, and antioxidants, which are incorporated into the base hot melt resins to enhance adhesive performance. Natural or synthetic tackifiers are usually added to some formulations to alter or improve adhesion (tack), surface wetting, open time, and polymer flexibility of the adhesive. Waxes help to reduce pellet blocking, and reduce melt viscosity, and/or enhance the tack of the adhesive. Antioxidants are used to prevent/minimize oxidation and decomposition of the hot melt during service and during processing and to improve storage stability.

VF790 is a maleic anhydride and vinyl acetate functionalized polyethylene mixture, easy to form film, with excellent processability and adhesive strength.

Mechanical Properties

Thermal Properties

Note:The datas is used for referential purpose only, not for quality commitment.

Advantages

1. Good film forming performance, can be formed into 0.02 ㎜ thick film;
2. High adhesive strength, good durability, excellent adhesive interface performance, showing the interface adhesive cohesion energy destruction;
3. Can withstand a certain acid, alkali, salt spray and other chemical solvent corrosion;
4. Strong adaptability, can meet the needs of high-speed production;
5. Good weather resistance, adapt to the climate temperature change environment, can be outdoor use.

Chemical Structure

Composition: Maleic Anhydride and Vinyl Acetate functionalized polyethylene mixture.

Application

VF790 is widely used as binder for aluminum plastic panel and heat insulation panel.

Statement: the above processing technology shall be different according to different conditions such as product size, mold design and processing equipment specification, and the details shall be adjusted according to the actual situation.