M&T Plastic Products (Huizhou) Co., Ltd. |
Verified Suppliers
|
|
Self Adhesive EVA Hot Melt Adhesive Film Is Used For Weaving Marks Or Trademark Embroidery Badges
Characteristics of hot melt adhesive film
Common thickness 50μm, 75μm, 100μm, 125μm, 150μm, special specifications can be customized;
The width of the conventional whole roll is 48cm, 50cm, 96cm, 138cm, 150cm, 152cm, special specifications can be customized, and small specifications can be cut roll by roll;
The substrate is a commonly recommended specification, the substrate can be replaced according to customer requirements, and some products can produce substrate-free film;
Bonding strength is 100μm thick film, using flat ironing machine and ordinary cotton cloth at normal room temperature, the test data will be different due to different materials and processes;
The bonding conditions can be adjusted appropriately according to the customer's tools, different materials, thickness and processing conditions;
The bonding material may be affected by factors such as material formulation and surface treatment, and may cause poor bonding during use. Special materials can be adjusted in combination with the actual process.
Attention: The test data in the table are obtained under specific conditions and are for reference only. The user is responsible for judging the usability according to the application requirements.
Application of hot melt adhesive film for sewfree garment
"M&T" sewfree film products make soft feeling, wear-resistant, washable, rub-resistant, and mold-resistant. They have excellent low-temperature flexibility and tensile strength, as well as excellent adhesion, which makes better adhesive, it has an unmatched sewfree fit performance.
Pes Hot Melt Polyester Adhesive Film For Textile Fabric
Description:This product is a thermoplastic adhesive, suitable for a variety of uses on a wide range of materials. It performs an excellent adhesion for textile, polyester, cotton, blended fabric, PVC etc. This adhesive exhibit excellent wash and dry cleaning resistance.
Application:
DS001TS development direction and application is on garment
accessories, footwear, handbags, luggage, embroidery, crafts
ofadhesive.
Physical performance and using suggestion:
Hot melt adhesive film | ||||||||
Model | MTE12 | MTW12 | MT13 | MT50 | ||||
Composition | EVA | EVA | EVA | EVA | ||||
Appearance | Transparent | Web | Transparent | Transparent | ||||
Gauge① | 160~180μm | 20~50μm | 25~250μm | 25~250μm | ||||
Width② | 18~1500mm | 1600mm | 4~1380mm | 4~1380mm | ||||
Substrate③ | N/A | N/A | Release paper | Release paper | ||||
Hand | Medium | Very soft | Medium | Medium | ||||
Softening point | 75℃(167℉) | 75℃(167℉) | 80℃(176℉) | 85℃(185℉) | ||||
Wash | Weak | Weak | Weak | Weak | ||||
Low temperature | ˃ -30℃(-22℉) | ˃ -30℃(-22℉) | ˃ -30℃(-22℉) | ˃ -30℃(-22℉) | ||||
High temperature | ˂ 60℃(140℉) | ˂ 55℃(131℉) | ˂ 60℃(140℉) | ˂65℃(149℉) | ||||
Bonding strength④ | ˃ 1.8kgf/25mm | ˃ 1.5kgf/25mm | ˃ 1kgf/25mm | ˃ 1.5kgf/25mm | ||||
件Suggested bonding conditions⑤ | 90~110℃(194~230℉) | 90~110℃(194~230℉) | 90~110℃(194~230℉) | 100~120℃(212~248℉) | ||||
Bonding material⑥ | Protective suits / mask nose bridge / non-woven fabrics, textiles, metal foil Mylar / plastic, PET / PP / EVA, glass / leather / wood / paper, etc. | |||||||
Application | Protective suits | Non-woven fabrics/Textiles | Daily necessities/decorative materials | Automotive interior/electronics |
Hot melt adhesive film
Application
Home Textiles
Curtain, table cloth, mattress, etc..
Heat Transfer Printing
Flocking, gilding and pyrography
Electronic Products
Low pressure injection molding products
Interlining
Strong bonding strength, stable performance, resistance washing and dry cleaning. Choice for double dot, paste dot, powder dot.
Automobile Industry
Roof lining, seat, heat insulating system, sound pannel, air filter, sofa cushion, carpet etc..
Filter Material
Air filtration process, fuel filtration system, lamination, active carbon nonwoven, paper, etc..
Art Jewelry
Have a good strength for bonding metal, glass, organic material, plain film and aluminium covers a wide range of application
Shoes Industry
Front upper adhesive, shoes cloth stereotypes, shoes compound, back upper adhesive
Other Industries
Women`s underware, reflective material, conductive cloth, forming cloth, wall cloth, embroidery badges, woven labels etc...
FAQ
1. How about hot melt adhesive film?It is just a film, and the basic material is release paper. But the
film is solid in room temperature, when reach its melt
point, it is able to bond other materials, Different materials of
hot melt adhesive film have different performances and different
usages, we need understand your demands ,then recommend you right
products to you.
2. Do you accept OEM or ODM?Yes ,we accept OEM and ODM, we are professional heat transfer
material manufacturer ,having more than 10years experience. able to
assist you R&D new products. So if you need bonding some
special materials, please don't hesitate to let us know.
3. How do you transport the products?If you are not urgent, we usually transport by ship because it is
the cheapest way. But for the West Asia area,
we deliver by train because there is no sea to ship. And for
samples and urgent cargo, we transport it by air as it is the
fastest way .Of course if you have other better idea about
transport, we will accept it.
4. May I have your samples?If you need some sample for reference, please let us know your
fully address/ship mode with courier ,and we will arrange sample
for your reference.
5. How long is the lead time?Sample lead time:3-7 days Bulk lead time:7-10 days(depends on order
quantity)
6. How do I pay for my order?We accept T/T , Paypal .