Shenzhen Tunsing Plastic Products Co., Ltd. |
Verified Suppliers
|
|
620mm Width Light Yellow PA Hot Melt Adhesive Glue Film For Plastic
Metal
Product Description
620mm Width Light Yellow PA Hot Melt Adhesiveglue Film For Plastic
Metal
This product is a thermoplastic film modified hot melt adhesive,
entrusted to the release of paper, can be repeatedly heated
plasticizing bonding.
.This kind of hot melt adhesive has a wide range of adhesive
properties, including textile fabrics (cotton, nylon, polyester,
acrylic, acrylic), thermosetting materials (epoxy resin, phenolic
resin), PVC, ABS, PC, PI, PU, metal, leather, glass fiber and
composite materials.Moreover, it has broad activation temperature
and moisture resistance, and is insoluble in ketone solvents.
Physical Characteristics:
Colour | Light Yellow |
Proportion | 1.2±0.02g/cm³ |
Melting Range | 90-120℃ |
Liquidity Index | 20±10g/10min |
Mechanical Mold Temperature | 130℃-190℃ |
Conventional Width | 620MM |
The Applications of PA Hot Melt Adhesiveglue Film For Plastic Metal
DS0022 is applied in 3C electronics, 5G, automobile, precision
instrument, medical treatment, luggage and sports goods.
Recommended Bonding Conditions:
First Lamination | Second Implanting | ||
Mechanical Mold Temperature | 130℃-190℃ | Mechanical Mold Temperature | 130℃-190℃ |
Hot Pressing Time | 5-15 seconds | Hot Pressing Time | 8-25 seconds |
Pressure | 0.3-0.6mpa | Pressure | 0.3-0.6mpa |
1.Bonding temperature and pressure and time relate to the bonding
strength of the film to the material. The bonding temperature must
be close to the temperature set by the machine, the pressure must
be uniform, and the mold and press rolls must be flat.
2. The bonding conditions used will vary between machines and
materials. The conditions indicated here are only basic. The most
ideal bonding conditions should be established by manufacturing for
the specific application.
Note: The seller hereby declares that Tunsing will refuse to accept
the assurance of the components of the manufacturing
process.Tunsing firmly believes that the information content is
reliable. However, the claims for possible problems will not be
guaranteed for the components of a particular process. Before use,
the manufacturer must determine the suitability of the product for
the items to be used. The user must bear the risks and possible
problems in the various manufacturing stages of testing and use.
The Seller and the manufacturer shall not be liable for any direct
injury, loss, damage or misuse.
Customer Feedback
Packing & Delivery
Packing Details:100Yards/roll , or it's up on the customer's option