|
[China]
Trade Verify
Address: Tunsing Industrial Zone, No. 28 Xiatian village, Longtian street, Pingshan District, Shenzhen City, Guangdong Province, China
Contact name:Abby Zou
Shenzhen Tunsing Plastic Products Co., Ltd. |
|
Verified Suppliers
|
|
|
Operating Temperature 130°C -160°C Copolyester Hot Melt Book Binding Adhesive Film
Product Description
Hot Melt Adhesive Film Product: DS001TS
Hot Melt Adhesive Film Description:
This product is a thermoplastic adhesive, suitable for a variety of uses on a wide range of materials. It performs an excellent adhesion for textile, polyester, cotton, blended fabric, PVC etc. This adhesive exhibit excellent wash and dry cleaning resistance.
Hot Melt Adhesive Film Application:
DS001TS development direction and application is on garment accessories, footwear, handbags, luggage, embroidery, crafts of adhesive.
Hot Melt Adhesive Film Composition:
Co-polyester
Hot Melt Adhesive Film Physical Characteristics:
Color | Milk white translucent | Release Liner | Glassine release paper |
Density | 1.15±0.02g/cm3 | Conventional thickness | 0.05mm ,0.08mm, 0.1mm, 0.12mm, 0.15mm, 0.18mm |
Washing | 40°C/72H | Width scope | 5mm-1500mm |
Melt Flow Index | 28±5g/10min; Condition:ASTMD1238-04 | Conventional Width | 480mm,1000mm,1380mm,1480mm |
Rheology Temperature | 100°C | Length | 100 yards |
Operating Temperature
| 130°C -160°C | Finished Products Specification | 480mm*100yards/roll |
Hot Melt Adhesive Film Recommended Bonding Conditions:
Flat Press | Second Flat Press |
Machine Setting: 120℃-140℃ | Machine Setting: 130℃-160℃ |
Dwell Time: 5-15 seconds | Dwell Time: 8-25seconds |
Pressure: 0.3-0.6mpa | Pressure: 0.3-0.6mpa |
1, Bonding temperature and pressure as well as the time involved in the strength of the film to material. Bonding temperature must be close to the machine set the temperature, the pressure must be uniform, mold and pressure roller must be flat.
2, In different machinery and materials, the bonding conditions used will be different. The conditions marked here are only basic. The optimum bonding conditions should be made by creating suitable construction conditions for the particular application damage, direct or consequential, arising out of the use, misuse or inability to use the product.
NOTICE: Seller hereby excludes any express warranties and the implied warranties of merchantability and fitness for a particular purpose. The following is made in lieu of any such warranties. Tunsing believes the information supplied are reliable, but does not guarantee that any results shown or claimed will be obtained. Before using the user shall determine the suitability and fitness of the product for its intended use. The user assumes all risks and liability whatever in connection with its own tests and use. Neither seller nor manufacturer shall be liable for any injury, loss or damage, direct or consequential, arising out of the use, misuse or inability to use the product.
Hot Melt Adhesive Film Detail Description
Type | Color | Density | Melting Point | Operating | Conventional width |
DS001TS | Milk white translucent | 1.15±0.02g/cm3 | 100°C | 130°C -160°C | 500mm,1000mm |
DS0012TS | Milk white translucent | 1.15±0.02g/cm3 | 110°C -120°C | 140°C -170°C | 500mm,1000mm |
Our company has passed ISO9001:2015 quality management system certification, and all products in our company are up to RoHS,REACH, Oeko-tex, California Proposition 65, Halogen Test Report, PFOA, PFOS, PAHS, HBCDD and other environmental standards.
In order to strengthen the management of quality , we purchase many kinds of test equipments.
for example : Melt Flow Index Machine Differential Scanning Calorimetry Peel Force Tester High Low Temperature Tester Chamber Bend Distortion Tester Thrust Tester
Hot Melt Adhesive Film Packaging & Shipping
1 .How about hot melt adhesive film?
It is just a film, and the basic material is release paper. But the film is solid in room temperature, when reach its melt point,it is able to bond other materials, Different materials of hot melt adhesive film have different performances and different usages, we need understand your demands,then recommend you right products to you.
2.Do you accept OEM or ODM?
Yes ,we accept OEM and ODM,we are professional heat transfer material manufacturer ,having more than 10years experience.able to assist you R&D new products. So if you need bonding some special materials, please don’t hesitate to let us konw.
3.How do you transport the products?
If you are not urgent, we usually transport by ship because it is the cheapest way. But for the West Asia area,
we deliver by train because there is no sea to ship. And for samples and urgent cargo, we transport it by air as it is the fastest way.Of course if you have other better idea about transport, we will accept it.
4. May I have your samples?
If you need some sample for reference,please let us know your fully address/ship
mode with courier,and we will arrange sample for your reference.
5. How long is the lead time?
Sample lead time:3-7 days
Bulk lead time:7-10 days(depends on order quantity)
6. How do I pay for my order?
We accept L/C ,T/T ,Western Union , Paypal
Contact us
