|
[China]
Trade Verify
Address: Tunsing Industrial Zone, No. 28 Xiatian village, Longtian street, Pingshan District, Shenzhen City, Guangdong Province, China
Contact name:Abby Zou
Shenzhen Tunsing Plastic Products Co., Ltd. |
|
Verified Suppliers
|
|
|
Heat Transfer Printing DTF Film 30cm 33cm 60cm Single Side Matte DTF PET Film Roll
Width and Length: DTF film rolls are available in various widths and lengths to accommodate different printing requirements. The width of the film roll should be compatible with the printing capabilities of the chosen printer, while the length determines the number of prints that can be produced before needing to replace the roll.
Storage and Handling: DTF film rolls should be stored in a cool, dry place, away from direct sunlight or excessive heat, to prevent degradation of the film and adhesive properties. The rolls should be handled with clean hands or gloves to avoid transferring dirt, oil, or moisture onto the film surface.
Reusability: DTF film rolls are typically designed for single-use, meaning they are intended to be used for one transfer process. Once the design is successfully transferred to the fabric, the film roll is peeled away and discarded. However, some film rolls may be reusable for a limited number of transfers, depending on the quality and condition of the film and adhesive layer.
DTF PET Film Physical Characteristics:
Product Specification | Conventional Thickness | 0.075mm, 0.10mm |
| Conventional Length | 100m | |
| Conventional Width | 600mm | |
| Finished Product | 0.075mm*600mm*100m/roll | |
| Operating Conditions | Heat Press Temperature | 130℃-160℃ |
| Heat Press Time | 8-15 seconds | |
| Pressure | 0.3-0.5mpa | |
| Washing Resistance | Washable Temperature | 45℃-60℃ |
| Storage Conditions & Shelf Life | It is strictly forbidden to collide with sharp objects. When opening the package and not using it, please seal it and store it to prevent moisture and high temperature | |
| The storage conditions are temperature -5℃-30℃, humidity 40-80%, avoid direct sunlight, shelf life is one year | ||
Cautions:
1. Tear-off method: cold or hot tear.
2. Printed film is a soft product. It is normal for the surface to be slightly sticky, and the surfaces should be prevented from sticking to each other.
3. Reasonable control of temperature and pressing time. If the temperature is too high or the time is too long, it is easy to cause discolouration or loss of elasticity.
Application of DTF PET Film:
WHY CHOOSE US
1. Customised services
2. Professional after-sales service
3. Low price
4. High quality
Save a lot of cost and money.
Make printing easier.
5. Security
Faster speed and lower cost.
Environmentally friendly Non-toxic and odourless. No toluene.
