Higao Tech supply best price of
square static vacuum dryer machine in china. Square static vacuum dryer machine has the same function
as round shape static vacuum tray dryer machine, The only
difference is the different shape. Customers choose as per their
preference.
1. Description:Square static vacuum dryer means putting raw materials to heat and
dry under the state of vacuum.
Fit for drying heat sensitive raw materials that can decompose and
polymerize and metamorphose and deteriorate under high temperature
in pharmaceutical, chemical, food and electronic industries.
2. Features:(1) Under the condition of vacuum, the boiling point of raw
materials will decrease and the heat conducting pushing force of
evaporator will increase. Thus for a certain amount of heat
radiation, the conducting area of the evaporator can be saved.
(2) The heating source for evaporation could be low pressure steam
or surplus heat steam.
(3) Heating loss of the evaporator is reduced.
(4) Especially suitable for drying heat sensitive materials which
are easy to dissolve, agglomerate or polymerize or denature.
(5) Customer can carry out the treatment of disinfection before
drying to avoid impurities during the period of drying.
(6) It is a static dryer. No demage to the shape or structure of
raw materials.
3. Notice:(1) Before placing order, please choose suitable vacuum dryer in
accordance with the physical property, primary moisture and final
moisture of raw material and factors such as temperature, vacuum
level, drying capacity and drying time, etc. Round static vacuum
drying machine has four heating ways, steam, hot water, heat
conduction oil and electricity.
(2) In order to increase the output of product, the drying layer
can be increased accordingly.
(3) Choose the auxiliary parts of vacuum drying system which is
indicated in operation manual and supplied and installed by us.
(4) We can also design, manufacture and install as request for some
special requirements.
(5) If use vacuum pump to take out air and humidity, the drying
speed will be faster.
(6) If use condenser, the solvent in raw material can be recovered.
If the solvent is water, condenser might be canceled and the cost
could be saved.
