Automatic Thermal Oil Boiler 1400kw Hot Oil Heater Conduction Oil Medium

1400kw YLW series automatic industrial coal fired hot oil boiler hot oil heater thermal oil heater price

Product description

Horizontal chain coal fired hot oil boiler is a new type of special boiler with heat transfer fluid as heating medium. With low pressure and high temperature operating characteristics. With the development of industrial production and the advancement of science and technology, horizontal chain coal-fired heat-conducting oil furnaces have been continuously developed and applied. Although the working pressure of the horizontal chain coal-fired heat-conducting oil furnace is relatively low, the temperature of the heat transfer fluid in the furnace is high, and most of them have the characteristics of inflammable and explosive. Once leakage occurs during operation, it will cause fire, explosion and other accidents, even Resulting in casualties and property damage.

Coal fired hot oil boiler is the common name of heat-conducting oil furnace, commonly known as heat-conducting oil boiler, the official name is heat-conducting oil furnace. The utility model relates to a novel thermal energy device which uses coal, oil and gas as fuel and heat-conducting oil as a circulating medium for heating. The high-temperature circulating pump is used to force the heat-conducting oil to perform closed-circuit circulation, and the process of returning to the boiler for heating after the heat energy is supplied to the heat equipment is used. . Because the heat transfer oil furnace has the advantages of high temperature and low pressure, and its heating temperature can be precisely controlled, it can replace the heat supply of the original steam boiler. At the same time, the equipment does not need water treatment equipment and does not have heat loss such as run, run, drip, and leak of steam boiler. Therefore, it has a one-time investment and low operating cost, and is a safe, efficient and energy-saving heating equipment.

Coal fired hot oil boiler Features:

Low operating pressure: liquid phase transport heat energy, can obtain higher working temperature under lower operating pressure, the heat carrier is 70-80 times smaller than the saturated steam pressure of water, and the general heating operating pressure is 0.3-1.0 MPa;

The heating temperature is high: the heating temperature of the heat transfer oil heating furnace can reach 350 ° C, and the heating temperature of the molten salt furnace can reach 530 ° C;

Water conservation: it can replace the water-poor area of ​​the water-based steam boiler heating, and is not easy to freeze in cold regions; heat transfer oil heat transfer oil furnace heat transfer oil heating furnace heating furnace working principle and product features:

The heating medium heating furnace is based on bituminous coal, light oil, heavy oil, flammable gas, waste wood and sanding powder.

The hot oil or molten salt is a heat carrier, and the direct-flow special industrial furnace is heated by a circulating pump to force the liquid phase to transfer the heat energy to the heating device and then to the heating furnace for reheating.

Eco-friendly design: High-tech combustion system configuration, allowing you to use it in any environmentally-friendly control area with closed-circuit forced circulation heating process system, no emissions, no loss, no waste, no pollution;

Investment cost province: The domestic leading level system design, saving 20% ​​investment and operation of the city than the similar products. Advanced product technology can replace imported equipment and save equipment investment;

Intelligent control: PLC programmable touch screen automatic control technology, as long as you press with a finger, you can perform stable heating and precise temperature adjustment, temperature automatic control adjustment is sensitive, temperature adjustment accuracy is high, and heat supply is stable;

Good energy-saving effect: closed circuit forced circulation heating process system, no emissions, no loss, no waste, no pollution;

Replacing coal with electricity, replacing coal with oil, and having high economic benefits, can recover investment in a short period of time;

Maintain optimum thermal efficiency under different working conditions;

The five-pass design, the thermal energy center for comprehensive utilization of flue gas, makes the thermal efficiency reach over 95%;

The unique convection section arrangement ensures that the flue gas is fully exchanged under high turbulence conditions;

High-quality lightweight refractory insulation material minimizes surface heat loss while improving the operating environment

Closed loop heating, high heat utilization rate;

Safe and reliable: with complete operational control and safety monitoring devices;

Wood Fired Thermal Hot Oil Boiler Datasheet

VERTICAL YGL HAND FEED COAL/WOOD FIRED THERMAL OIL HEATER DATA SHEET

VERTICAL YLL TYPE  CHAIN GRATE AUTOMATIC COAL FEEDER THERMAL OIL HEATER DATA SHEET

YLW HORIZONTAL CHAIN GRATE TYPE THERMAL OIL BOILER HEATERS DATA SHEET