Active Member
|
[China]
Address: Room 1407,BuildingA,No.13,Beiyuan Road,Chaoyang District,Beijing,China
Contact name:Jack Cheng
Beijing Jincheng Mining Technology Co., Ltd. |
|
|
2 Inch - 12 Inch Down The Hole Hammer Medium High Air Pressure Wear Resistant
Description
DTH drilling tool is a kind of drilling system which uses
compressed air as motivation, makes drilling impact motivation
parts down the hole, to control the piston reciprocating motion by
the distribution device in the hammer, and then impacts the DTH bit
in the front of the hammer to transit the impacting power to the
bit. The DTH bit in the front of the hammer breaks the rock to
drill hole.
At present, DTH drilling tool is widely used in underground mining, quarries, hydraulic and Hydro-Power Engineering, water well drilling, Mineral exploration, anchoring hole drilling, geothermal engineering, Subway excavation, another civil engineering. it has the advantage of high flatness, smooth hole wall, high rigid of drill rod and hammer, independent of high axial thrust, no limit of drilling depth, low cost of devices and easiness to maintain. At the drilling hole of dia.105mm-dia.254mm, a plenty of the DTH drilling tools are used.
Application
Down The Hole Hammer is mainly used in underground mining and quarrying ,water well drilling
Advantages:
-Valveless air distribution. More reliable.
- Simple design of the piston. Long life.
- More efficient energy transfer, fact drilling speed, lower air
consumption and lower oil consumption.
- Fewer internal parts, simple structure, long life, less failure
and easier to maintain because all the parts are heat treated.
- Easy to disassemble because the top sub, the drive chuck and the
external cylinder are connected by multi-step thread.
DTH hammers specifications:
| DHD/COP series DTH HAMMERS | ||||||
| DTH hammer type | DHD35 | DHD340 | DHD350 | DHD360 | DHD380 | DHD1120 |
| Bit shank | IR3.5 | COP44 DHD340 | COP54 DHD350R | COP64 DHD360 | COP84 DHD380 | DHD1120 |
| Hole range(mm) | Φ90-115 | Φ110-135 | Φ135-155 | Φ155-203 | Φ195-254 | Φ305-445 |
| Connection thread | API 2 3/8” Reg. | API 2 3/8"Reg | API 2 3/8"Reg | API 3 1/2"Reg | API 4 1/2"Reg | API 6 5/8"Reg |
| API 3 1/2"Reg | ||||||
| Working pressure | 1.0-1.5Mpa | 1.0-2.5Mpa | 1.0-2.5Mpa | 1.0-2.5Mpa | 1.0-2.5Mpa | 1.0-2.5Mpa |
| QL series DTH HAMMERS | ||||||
| DTH hammer type | QL40 | QL50 | QL60 | QL80 | ||
| Bit shank | QL40 | QL50 | QL60 | QL80 | ||
| Hole range(mm) | Φ110-135 | Φ135-155 | Φ155-203 | Φ195-254 | ||
| Connection thread | API 2 3/8"Reg | API 2 3/8"Reg | API 3 1/2"Reg | API 4 1/2"Reg | ||
| API 3 1/2"Reg | ||||||
| Working pressure | 1.0-2.5Mpa | 1.0-2.5Mpa | 1.0-2.5Mpa | 1.0-2.5Mpa | ||
| SD series DTH HAMMERS | ||||||
| DTH hammer type | SD4 | SD5 | SD6 | SD8 | SD10 | SD12 |
| Bit shank | SD4 | SD5 | SD6 | SD8 | SD10 | SD12 |
| Hole range(mm) | Φ110-135 | Φ135-155 | Φ155-203 | Φ195-254 | Φ254-311 | Φ305-445 |
| Connection thread | API 2 3/8"Reg | API 2 3/8"Reg | API 3 1/2"Reg | API 4 1/2"Reg | API 6 5/8"Reg | API 6 5/8"Reg |
| API 3 1/2"Reg | ||||||
| Working pressure | 1.5-2.0Mpa | 1.0-2.5Mpa | 1.0-2.5Mpa | 1.0-2.5Mpa | 1.0-2.5Mpa | 1.0-2.5Mpa |
| MISSION series DTH HAMMERS | ||||||
| DTH hammer type | MISSION4 | MISSION5 | MISSION6 | MISSION8 | ||
| Bit shank | MISSION4 | MISSION5 | MISSION6 | MISSION8 | ||
| Hole range(mm) | Φ110-135 | Φ155-190 | Φ155-203 | Φ195-254 | ||
| Connection thread | API 2 3/8"Reg | API 2 3/8"Reg | API 2 7/8"Reg | API 4 1/2"Reg | ||
| API 3 1/2"Reg | API 3 1/2"Reg | |||||
| API 2 7/8"Reg | 2 7/8"IF | |||||
| Working pressure | 1.2-2.0Mpa | 1.3-2.3Mpa | 1.5-2.5Mpa | 1.5-3.0Mpa | ||
| NUMA series DTH HAMMERS | ||||||
| DTH hammer type | NUMA100 | NUMA120 | NUMA125 | |||
| Bit shank | NUMA100 | NUMA120 | NUMA125 | |||
| Hole range(mm) | Φ254-311 | Φ305-445 | Φ305-445 | |||
| Connection thread | API 6 5/8"Reg | API 6 5/8"Reg | API 6 5/8"Reg | |||
| Working pressure | 1.0-2.5Mpa | 1.0-2.5Mpa | 1.0-2.5Mpa | |||
Packing
Delivery
FAQ
1. Shipping time for an order
We have many stock. As usual, we can delivery
the goods as soon as we get the full payment.
2. Quality Control
Strict inspection and testing for every order before
shipping out .
3. How can we trust your company?
We support Alibaba trade insurance. Protect products
quality, shipment on time and your covered amount.
4. After Sales Service
Free replacement will provide once the failure
confirmed caused by our product quality.
5. Do you offer OEM service
Yes,we offer OEM service if you have any regular
requirements
