|
Trade Verify
Address: Room 1302,Yufei Building, 42 Dongzhimenwai Street, Dongcheng District, Postcode:100027 Beijing,China
Contact name:Lisa Niu
Beijing HiYi Technology Co., Ltd |
|
Verified Suppliers
|
|
|
The POLI multi-gas detectors (MP400/MP400P/MP400S/MP400H) offer 4- or 5-gas monitoring of oxygen (O2), combustibles (LEL), numerous toxic gas options, carbon dioxide (CO2), and volatile organic compounds (VOCs). The MP400 is a basic 4-gas model with diffusion sampling, often configured with O2, LEL, carbon monoxide (CO) and Hydrogen Sulfide (H2S) for confined space entry compliance. The MP400P has pumped sampling and offers a full range of over 30 sensor options, including electrochemical (EC), pellistor, non-dispersive infrared (NDIR) and photo-ionization detector (PID). With 4 sensor slots the use of combination sensors allows up to 6 gases to be measured. The MP400S and MP400H are used in wireless communication systems for real-time monitoring of gas readings and alarm status, including man-down alarm, from remote locations for better visibility and faster response. One MP400H head monitor communicates with up to 7 MP400S Soldiers. Contact us for larger wireless systems with up to 32 monitors
* Available in diffusion or pump version
* Over 30 interchangeable sensor options, including PID for VOC, NDIR and catalytic for combustibles, and NDIR for CO2
* 4 Sensor slots for up to 6 gas measurements using combination sensors
* Real-time gas concentration readings
* Alarm status including Low, High, TWA, STEL and Man-Down alarms
* 6 Months continuous datalogging
* 16-Hour rechargeable Li-ion battery (diffusion version)
* IP-65/67 water and dust resistant case * 360-Degree LED alarm bar; Flip screen
* Large graphical display icon-driven user interface through intuitive, simple-to-operate two-button user interface
* Easy access to pump, sensor, filter and battery
* Smart Sensors store calibration data, so they can be swapped in the field
* USB Micro charger & communications cable
* Optional POLI MonoDock station for automated bump test and calibration
* Wireless real-time remote team communication available (up to 32 monitors)
* Oil and gas
* Fire ground “Toxic Twins” detection
* Environmental
* Chemical
* Pharmaceutical
* Telecommunications
* Multi-gas leak detection in industries such as chemical, food and beverage, oil and gas (downstream)
| Size | 5.74 x 3.31 x 1.65 in (140 x 84 x 42 mm) |
| Weight | 14 oz (400 g) |
| Sensor | Over 30 interchangeable and field-replaceable sensors including PID for VOCs, EC for Toxic and O2, Pellistor for LEL, and NDIR for LEL and CO2 |
| Battery | Rechargeable Li-ion pack:16 hours in diffusion with no wireless, 14 hours in diffusion with wireless, 12 hours in pump with no wireless, and 10 hours in pump with wireless |
| Direct Readout | Real-time reading of gas concentration, PID measurement gas and correction factor, Man Down Alarm on/ off, individual compliance indicator, battery status, datalogging on/off, wireless on/off and reception quality STEL, TWA, peak and minimum values |
| Display | 128 x 128 graphical LCD, 1.77 x 1.73 in (45 x 44 mm), with LED backlight for enhanced display readability. Automatic screen “flip” feature. |
| Keypad | 2 operation keys |
| Sampling | Bulit-in pump or diffusion |
| Calibration | Manual or automatic bump test and calibration with CaliCase (separate orders) |
| Alarm | Wireless remote alarm notification, audible (90dB@750px), vibration, visual (flashing bright red LEDs), and on-screen indication of alarm conditions Man Down Alarm with pre-alarm and real-time remote wireless notification |
| Datalogging | Continuous datalogging (6 months for 4 sensors at 1 minute intervals, 24 hours a day and 7 days a week) |
| Charging and Communication | Charging, data download, instrument setup and firmware upgrades on PC or laptop via PC comm, cradle, travel charger, or CaliCase Wireless data and alarm status transmission via built-in RF modem (optional) |
| Temperature | -4° to 122°F (-20°C to 50°C) |
| Humidity | 0% to 95% relative humidity (non-condensing) |
| IP Rating | IP-65 (pump); IP-67 (diffusion) |
| Safety Certifications | UL/cUL: Class I, Div 1, Group A, B, C, D |
| T4, -20°C ≤ Tamb ≤ +50°C (pending) | |
| EMC/RFI | |
| EMC directive: 2004/108/EC | |
| Warranty | 2-year including most sensors |
