Active Member
|
[China]
Address: 4F,Building 7,Optical Valley International Headquarters Industrial Park,No.62,Optical Valley Road,Wuhan,China
Contact name:
Wuhan Huaying Electric Power Tech & Science Co., Ltd |
|
|
Portable Ground Power Digital Cable Fault Tester Cable Fault Finding Equipment
Product Introduction
Cable Fault Detector is a testing device of good integrity. It can test on the High
Resistance Flashover Fault, Grounding High and Low Resistance
Fault, Short & Off Circuit on the Cable Fault and Poor contact
and etc. If being equipped with sounding method and locating
instrument, it can exactly detect the fault point. Furthermore, it
especially applies to test for
various power cable and communication cable.
Technique index
1 maximum detect distance 30km
2 detect resolution 1m
3 power supply of tester is AC220V 10% 45~65Hz
4 Battery support in the tester
5 sample rate of impulse signal is 100MHz
6 voltage series of cable can be test are low voltage power cable(0~1kV), high voltage power
cable(1kv~35kv) and communication cable
7 fault type can be applied are disconnection of power cable, low insulation of power cable( High
voltage impulse generator is required), low resistance and high resistance connected to earth
and poor contact of connectors
8 Maximum saved records is 100 groups
9 Power consumption of tester is 5VA
10 Voltage divider ratio is 100:1
11 weight is less than 2kg
12 size is 225*165*125mm
13 work temperature 0~50 Celsius degree
1. High reception sensitivity
2. Low static drift
3. High positioning accuracy
4. Anti-interference ability
5. The LCD shows the signal and status
6. Built-in lithium battery and charger
Packing list
| Name | Quantity |
| Instrument | 1 |
| Power cable | 1 |
| output test cable | 1 |
| user’s manual | 1 |
| pass certificate | 1 |
