Aluminium Wire High Speed Wire Drawing Machine 1500mpm Spray Drawing Lubrication

 
   14DS Fine aluminium wire drawing machine is used to drawing aluminium wire from 1.6mm to 0.6mm.
 
I. Components
 

 
II. Specifications
 
1. Inlet wire diameter:1.6mm
2. Outlet wire diameter:0.6mm
3. Speed:1500mpm
4. Dies number:14
 
5. Slip ratio of machine:No.1 -No.13:15%, No.14: 8%
6. Wire drawing mode:standing-mode and 2 axes
7. Driver: by dual inverters control, Brand: Inovance,Chinese famous brand, made in Shenzhen.
8. Main motor: 15KW AC 3 phase motor
 
9. Spooler motor:5.5KW AC 3 phase motor
10. Motor brand: Wan Nan motor, China classical brand
11. Capstan:steel with ceramic coating,
12. Max capstan diameter:316mm
13. Max fix speed capstan:268mm
 
14. Machine structure:cast iron
15. Transmission: by Synchronous belts
16. Tension control:weight balance by swing arm
17. Spool size: 300mm-400mm
18. Take up: shaft type
19. Receiving weight:50-80kg/max
 
20. Brake: magnetic brake
21. Drawing Lubrication: spray
22. Power source: (customized)
23. Machine dimension:2600L*1600W*1930H
24. Machine weight: 2200KG
 
III. Advantage and after-sale service
 
A: Advantage
 
(1). HENGXIE has some world famous parts suppliers, has special lubrication system for the gears and bearing.
(2). Body and other key components and parts are produced by our own factory , quality is reliable.
(3). Our company’s developing process in more than 10 years.
 
B: After-sale service
 
Our company for all machine product, since the shipment date, our company free after sale maintenance service guarantee period is:
(1) 1 year for mechanical part.
(2) 6 month for electrical part.
 
IV. Operation details
 
1. Open the power switch of the electrical cabinet. Use the Foot-switch while make the wire through the dies. After make the wire through some dies, should open the lubrication oil to make sure no wire break.
Make the wire through the take-up part well arranged, then close the door.
2. According to the user`s require to set the Length-counter, adjust the balance arm. If wire breaks, will stop automatically, and the Fault Indicator light will open. After connect the wire, press the Fault Reset button(Yellow button) and the On button (Green button), to run the machine again.
3. Press Emergency Stop button(Red button) to shut down the machine immediately. After solve, press the button again to run the machine. After set the Length-counter, the machine will stop automatically when reach the length set.
4.After change the Spool, please press the Length Reset button(Yellow button) and the Spool Reset button(Yellow button) to run the machine again. After the machine stop(no running at all), then switch the Pump switch to stop the lubrication.
 
V. Common trouble solve method
 
1. After shut down the machine, need at least 30 seconds to restart the machine. Wire often breaks, adjust the speed, balance arm, check the dies are clean or not. Before open the machine, make the balance arm at the lowest position, and in running, the balance arm should be in the horizontal line.
 
2.No big shake, no up and down frequently. If the wire sticks to the capstan, use Alcohol to clean the capstans. Pay-off shelf doesn`t work well, change the position of the pay-off. Has nick on the wire, check the capstans on the Take-up part. Check the drawing capstans.