Industrial Bopp Tape Slitting Rewinding Machine Good Rewinding Appearance

Adhesive Tape Slitting Machine

Detail description: suitable for adhesive tape slitting and rewinding.

 the increasing automation and digitalization of slitter rewinders enables manufacturers of papers, tapes, films, thin plastics, and foils to adjust the dimensions of their products to virtually any width with a uniformity and accuracy unattainable through basic manual operation. Dynamic blade spacing can be adjusted to satisfy even the most specialized requirements, eliminating the need for a certain level of standardization in design. Meanwhile, various blade styles ensure that each material is slit in the cleanest, most economic, and most efficient way, drastically reducing production costs and times.

Though the general concepts of pulping, slurries, and forming have endured for hundreds of years, modern paper production alone would not have been able to keep up with our modern demands for such a vast array of items without the benefits of continuous production and the ability to automatically reduce those bulk materials into smaller, individually consumable quantities. So, the next time you use a sheet of paper, a roll of tape, a roll of tin foil, a sheet of plastic, a roll of film or a roll or strip of any other non-woven, flexible material, keep in mind that there’s a very good chance the last machine that material saw before packaging was a slitter rewinder.

Characteristics:

1. The two rewinding motors cooperate with the main motor to work as three motors motion control, the main motor blocks the unwinding and the rewinding motor control the tension, the tension of the finished product is stable, good rewinding appearance.
2. The rewinding arm adopts the pneumatic coupling control the balance, the contact pressure can be adjusted automatically during rewinding, the contact pressure can be set. This machine can also be equipped with discontinuous rewinding, cut other materials more widely.
3. The operation interface adopts LCD touch screen, various rewinding conditions and working conditions can be set directly on the screen, the control part adopts PLC to control the machine operation, with self-test system.
4. The machine drive uses AC motor and frequency inverter; acceleration and deceleration are stable and fast.
5. Optional with slat type air pressure shaft and pneumatic friction shaft, suitable for more material range, the shaft change is specially designed, can be change at any time.
6. Auxiliary discharge device, the material outfeed pass surface impression roll, material more even, and reduce the noise (suitable for adhesive material)
7. Separate type unwinding stand, for bigger unwinding diameter.

Specification: