Active Member
|
[China]
Address: 2nd Floor,No. 68, Dongxinjia Industrial Park, Honghu Village, Xinqiang Community,Xinhu Street, Guangming District, Shenzhen
Contact name:
Shenzhen Greenfair Electronics Co., Limited |
|
|
Choke cmc coil by T10*5*6.5C core bifilar winding by 2UEW ￠0.4mm wire and TEX-E ￠0.4mm low leakage inductance 1KV Hi-pot
Feature for Custom High Filter Choke Coil Inductor for Electronic Device
1. High Saturation materal &high efficiency
2. wide inductance range,high current capability low magnetic
leakage
3. low DC resistance,good control on noise due to the toroidal
constructure
4. Characteristics: Big current output, Huge power, Excellent
current choking performance.
5. Various material availiable to meet different frequency
requirements
Low loss
Fixed pin spacing allow easy PCB insertion.
Custom Designs Available.
Temperature Range:－40℃～＋125℃
Inductance value is 324 uH ±25%
Bifilar winding 9 turns
Hi-pot is AC1000V 5mA/3S Without break at 0.5mA 3s
RatingCurrent DC Idc (A):2.2 ~ 15
Tested at 1KHz to 100kHz, 0.0.25Vrms inductance of 10%uH
DC current at which the inductance drops 10% (type) from itsvalue
without current
Electrical characteristics at 25°C
Insulation: class B (130°C), class F (155°C), class H(180°C), class
N (200°C) and class R (220°C)
Certifications: UL, CQC and CE
Excellent utilization of electricity, good for
environmentprotection
Customized specifications are accepted
Applications:
UPS
Lighting driver
EMI/RFI filters
Switching power output and smoothing circuits
Used as choke coil for high frequency SMPs
DC/DC,AC/AC line noise suppression
Automotive System.
Communication System.
Power supply of all types of household appliances
Switching power supplies
Competitive Advantage:
1. High grade raw material from famous supplier
2. Big quality control teams ensure good quality of every single
piece of product.
3. 6S, QCC and SPC management systems ensure the quality
consistence
4. Strong R. & D team
| WINDING PARAMETER: | ||||||
| NO. | WINDING | MATERIAL | S--F | TURNS | REMARK | |
| 1 | N1 | 2UEW ￠0.4mm | 1----2 | 9 REF | ||
| 2 | N2 | TEX-E ￠0.4mm | 3----4 | 9 REF | ||
| ELECTRICAL CHARACTERISTIC: | ||||||
| NO. | ITEM | MEASURE POINT | TECHNICAL DATA | REMARK | ||
| 1 | INDUCTANCE | 1--2=3--4 | 324 uH ±25% | 10KHz 0.1V | ||
| 2 | HI-POT | N1--N2 | 1000VAC | 2mA 2sec | ||
| MATERIAL LIST: | ||||||
| NO. | MATERIAL NAME | MATERIAL SPEC. | PROVIDER | UL NO. | ||
| 1 | CORE | T10*5*6.5C KA50 | Jiuxin or equivalent | |||
| 2 | WIRE | 2UEW 130℃ | TAIYI or equivalent | E85640 | ||
| 3 | WIRE | TEX-E | GREAT LEOFLON or equivalent | E211989 | ||
| 4 | EXPOXY | 2006A/B | EATOO or equivalent | |||
General information:
It is recommended that the temperature of the part does not exceed
+125°C under worst case conditions.
Storage Temperature: -40°C to 85°C
Operating Temperature: -40°C to 125°C
Test conditions of Electrical Properties: 20°C, 33% RH if not
specified differently
| OPERATING TEMPERATURE RANGE, PACKAGE QUANTITY, PRODUCT WEIGHT | |||||
| Temperature range | Humidity range | Standard test conditions | |||
| Operating temperature* | Storage temperature | Operating temperature** | Storage temperature** | Operating temperature** | Storage temperature** |
| ( ℃) | ( ℃) | ( % RH) | ( % RH) | ( ℃) | ( % RH) |
| -30 to +120 | -40 to +80 | 10 to +95 | 10 to +95 | 25 ± 10 | 25 to +75 |
* With self-heating
** Maximum wet-bulb temperature 38°C, without dewing
*** Without dewing
