BAM 10.5kv 334 kVar Single Phase Power Capacitor High Voltage Capacitor Bank

BAM 10.5kv  334 kVar Single phase high voltage shunt power capacitor

1. Overview of BAM 10.5kv 334 kVar Single phase high voltage shunt power capacitor

     Medium voltage shunt capacitor/High voltage shunt capacitor is composed of a pack, a case, outlet porcelain busing, etc. The two sides of stainless steel case are welded with hanging brackets for installation, and one hanging bracket is equipped with a grounding bolt. In order to adapt to various voltages, the pack is composed of several small elements connected in parallel and series. The capacitor is equipped with a discharge resistor.

2. Function of BAM 10.5kv 334 kvar Single phase high voltage shunt power capacitor

       Medium voltage shunt capacitor/High voltage shunt capacitor are suitable for 50Hz or 60Hz AC power systems to improve the power factor of the power system, reduce line losses, improve the quality of the power supply voltage, and increase the active output of the transformer.

3. Main features of BAM 10.5kv 334 kvar Single phase high voltage shunt power capacitor

• 3.1 Casing: Cold-pressed, anti-fouling type casing is adopted, and the creepage distance is not less than 31mm/kV.
• 3.2 Mature internal fuse technology.
• 3.2.1 After testing, the internal fuse can isolate the faulty component within 0.2ms, the release energy of the fault point is not more than 0.3kJ, and the remaining intact components are not affected.
• 3.2.2 Advanced concealed internal fuse structure, using oil gap arc extinguishing, reducing the possibility of blasting the capacitor case.
• 3.2.3 The internal fuse protection and relay protection have perfect coordination standards to ensure the safe and reliable operation of the entire device.
• 3.3 Liquid medium: 100% insulation oil (NO PCB) is used. This liquid has excellent low temperature performance and partial discharge performance.
• 3.4 The main insulation adopts a composite insulation structure, which not only guarantees excellent electrical performance, but also has a certain degree of mechanical strength, which ensures that the insulation of the capacitor complete set of devices is 100% reliable without protection.

 4. Applicable standard of BAM 10.5kv 334 kVar Single phase high voltage shunt power capacitor

     IEC60871 or equivalent

5. Working Conditions

• 5.1 Applicable for indoor and outdoor
• 5.2 The altitude of the installation site generally does not exceed 2000 meters
• 5.3 Temperature category: -40/D
• 5.4 There is no gas or steam that is severely corrosive to metals.
• 5.5 No strong mechanical vibration