Active Member
|
[China]
Address: Plant 106, No. 25, Taian Road, XINQIAO VILLAGE, PANYU DIST. GUANGZHOU CHINA
Contact name:VANESSA WANG
Guangzhou Anlai Airtech Co.,Ltd |
|
|
ISO6 Medical Softwall Clean Room
A softwall cleanroom (also known as a portable cleanroom) pretty much describes itself, as does a hardwall cleanroom, at least when it comes to the construction materials that are (obviously) primarily used for the walls. A softwall cleanroom is typically installed for relatively short-term use, such as a university research project that won't be repeated. You wouldn't use a soft wall cleanroom, particularly if it wasn't equipped with an effective air shower, for long-term manufacturing needs. For such an application, a hard wall cleanroom would be the order of the day. A softwall cleanroom can have walls made from a wide variety of flexible (soft) materials that are typically hi-tech fabrics that are non-air permeable. You can even order an inflatable, soft wall cleanroom for the ultimate in savings due to the typically smaller size of a soft wall cleanroom that can be installed and subsequently removed with a minimum of effort. A hardwall cleanroom, on the other hand, can require a great deal of site preparation and below ground infrastructures that add to the overall expense of a Hardwall Cleanroom that is designed and built to last a lifetime.
Features
Cleanliness from Class 100 – 100,000
Clear Satin Anodized 6063-T5 Aluminum Frame
Clear Solid Softwall Vinyl curtains around perimeter with strip
entrances as required for entry/exit
Mac-10 HEPA Fan Filter Unit
Sealed Cleanroom Light Troffers to provide 100 foot candles at
working height level
Heavy duty 1-1/2” clear satin anodized aluminum ceiling support
T-grid
Gasket for ceiling supplied to insure a positive seal
Pre-wired prior to shipping with light/FFU switch, power cord(s) or
junction box
Designed to meet ISO Cleanroom Air Cleanliness standards
Many options are available for these systems including clear
antistatic vinyl curtain for static concerns or all stainless steel
frames for pharmaceutical applications.
What Type of Cleanroom is Right for Your Project?
A typical cleanroom is designed to keep outside contaminants and
particles at a minimum based on the ISO clean room standards. Once
fully built and operational, an isolated cleanroom is free from
outside particles and contamination. However, the two things that
can introduce particles and contamination into your cleanroom are
people and processes.
Classification for cleanrooms ranges from ISO 1 to ISO 9, with ISO 9 being the “dirtiest” and ISO 1 being the “cleanest.” These classifications are assigned based on the maximum allowable concentration of particles per cubic foot or meter of air. The lower the ISO class the more stringent the requirements for keeping particles and contamination to the acceptable levels of the room class.
As an example, Class 10,000 cleanroom filtration systems must provide filter coverage of 15-25% and – a minimum of 60 air changes per hour. The standard air flow rate for an ISO 7 filtration system is 9-16 CFM per square foot. The chart below provides an explanation of the differences between our clean room classes.
