Active Member
|
[China]
Address: No.2999 Qi Zhou Road ,Jinan ,China.
Contact name:DORIN YANG
SINO VEHICLE & EQUIPMENT COMPANY LTD |
|
|
Customized 15000kg Small Motor Graders GR165 with D6114 Engine ,
Yellow
Description:
GR165 road equipment 165hp motor grader with Cummins Engine.
GR165 motor grader with 165hp Cummins Engine ,it is mainly used for
ground leveling, ditching, slope scraping, bulldozing,
scarification, snow removal for large areas such as road
construction, airports, farmlands etc.
GR165 is the necessary construction machinery for national defense
construction, mine construction, urban and rural road construction
and water conservancy construction, farmland improvement and so on.
advantages
1. The GR165 adopts Dongfeng Cummins 6BTA5.9-C180-II turbocharged
diesel engine, which has large output torque and power reserve
coefficient and low fuel consumption.
2. The torque converter has a large torque coefficient, a high
efficiency, a wide effective area, and a good joint operation
characteristic with the engine.
3. Rear axle main drive is equipped with "NO-SPIN" without
self-locking differential. When one wheel slips, the other wheel
can still transmit its original torque.
4. The service brake is a dual-circuit hydraulic brake system that
acts on the two rear wheels of the grader and is safe and reliable.
5. The sealed cab is used to configure the air conditioning system.
The interior parts are sleek and compact plastic parts, which fully
reflects the needs of ergonomics.
SPECIFICATION:
| Item | GR165 | ||
Basic parameters
| Engine model | 6BTA5.9-C180-Ⅱ | |
| Rated power/speed | 130kW/2200rpm | ||
| Overall dimension (standard) | 8900*2625*3470mm | ||
| Total weight (standard) | 15000kg | ||
| Tire specification | 17.5-25 | ||
| Ground clearance (front axle) | 430mm | ||
| Tread | 2156mm | ||
| Space of front and rear axles | 6219 mm | ||
Performance parameters
| Forward velocity | 5,8,11,19,23,38km/h | |
| Reverse speed | 5,11,23km/h | ||
| Tractive effort f=0.75 | 77kN | ||
| Maximum gradeability | 0.25 | ||
| Tire inflation pressure | 260kPa | ||
| Working system pressure | 16MPa | ||
| Transmission pressure | 1.3—1.8Mpa | ||
Working parameters
| Maximum steering angle of front wheel | ±50° | |
| Maximum slant angle of front wheel | ±17° | ||
| Maximum oscillating angle of front axle | ±15° | ||
| Maximum oscillating angle of equilibrium box | ±15° | ||
| Maximum steering angle of frame | ±27° | ||
| Minimum turning radius | 7.3m | ||
| Scrape knife | Maximum lift height | 450mm | |
| Maximum cutting depth | 500mm | ||
| Maximum tilt angle | 90° | ||
| Cutting angle | 28°—70° | ||
| Angle of revolution | 360° | ||
| Length & chord height | 3660*610mm | ||
Oil filling amount
| Coolant | 50L | |
| Fuel tank | 280L | ||
| Engine | 24L | ||
| Transmission | 38L | ||
| Hydraulic oil | 110L | ||
| Drive axle | 28L | ||
| Balancing box | 46 L |
Photos:
Other products:
Truck series:
1. Dump trucks; cargo trucks (1-120ton)
2. Tractor trucks; (1-120 tons)
3.Tanker trucks,water tanker and oil tanker)
4. Mixer trucks and concrete pump truck
5. Mine dump trucks( 30 tons off-road mine tipper, 50tons/70tons mine dump truck, 6x6 articualted dump trucks)
6. Off-road drive trucks( 4x4. 6x6 and 8x8 Trucks)
7. Garbage trucks( garbage compactor truck, suction trucks)
8. Truck mounted cranes(normal road truck crane, truck mounted crane)
9. Special trucks( wrecker trucks, military trucks...)
10.Semi trailers( container semi-trailer, low-bed semi-trailer, tanker trailer, dumper trailer...)
11.Truck spare parts
Machine series:
1.Wheel loader,Backhoe loader
2.Roller
3.Motor Grader
4.Bulldozer
5.Excavator
6.Crane(truck crane,crawler crane,truck mounted crane,self erecting crane)
7.Forklift and 45t contain reach stacker
8.Paver and so on
9. Spare parts
