Zhejiang Haoke Electric Co., Ltd. |
Verified Suppliers
|
|
Replace ILME Heavy Duty Connector 10 Pin Male Female Plug Insert
Description
HA series heavy duty connectors are designed according to DIN
EN 61 984 and DIN EN 60 664. They are widely used when an
electrical and signal connection is required at Construction
machinery, textile machinery, packaging and printing machinery,
tobacco machinery, robotics, rail transit, hot runners,
electricity, automation, etc.With advantage of pre-installed,
pre-wired, mis-mating preventing, work efficiency improving, now
the HA series heavy duty connector are popular in Industrial
application.
Our Features :
1. All spart parts are manufactured at our workshop
2. Polycarbonate supplied by SABIC
3. All contacts are made by H62 brass with silver
plating 3μm thickness.
4. Salt Spray Test withstand more than 72 hours.
5. Plugging cycle withstand more than 500 times.
6. Strict Quality check , each screw connection was checked to make
sure the screw can fix the wires well and every mounting
holes are prepared well.
7. Compatible with Harting, TE / Sibas, ILME, Phoenix, Weidmuller,
Molex connectors.
8. CE, RoHS, CQC, CCC and ISO9001:2008 approved
Specification - Inserts
Numbers of contacts | 10+PE |
Rated current | 16A |
Rated voltage | 250V |
Rated impulse voltage | 4KV |
Pollution degree | 3 |
Rated voltage according to UL | 600V |
Insulation resistance | ≥1010Ω |
Material | Polycarbonate |
Flammability according to (UL94) | V0 |
Working temperature | -40℃±125℃ |
Mechanical working life - mating cycles | ≥500 |
Contacts: | |
Material | Copper alloy |
Surface | Silver Plated, Gold Plated |
Contact resistance | ≤1mΩ |
Screw terminal | |
Wire gauge | 1.0-2.5mm2 |
AWG | 18-14 |
Tightening | 0.5Nm |
Speficiation - Housing H10A Series
1) angled or straight entry
2) bottom open or closed
3) stainless steel locking lever to protect against
corrosion
4) Protective cover is available
5) NBR seals against harsh environment.
6) High construction Hood for larger wire is optional
7) PG thread or Metric thread is optional
8) IP65 against dust, moisture or mechanical pressure.
Instruction:
1). NOT for Current Interruption
2). Don't couple or decouple the connectors under electrical load.
3). Don't power up the connectors in the un-mated conditons even if
the connectors goes with a protective cover.
4). User should provide protection against electric shock.