Active Member
|
[China]
Address: No.40 Ailing Road, Moling Street, Jiangning District, Nanjing
Contact name:James Zhang
Nanjing Saiko Controls Co.Ltd |
|
|
Underfloor Touch Screen Heating Programmable Thermostat
Weekly circulation digital programming touch screen thermostat with LCD screen, which has 6-event everyday. Manual mode and programme mode could be selected.
For the control of warm-water(floor) heating systems and direct electric heatings systems used in Commercial buildings, Residential buildings, Light industrial buildings.
Programming
Choice of 7 day, 5/2 day programmable or
6 time and 4 temperature settings every day;
pre-programmed or personalized schedule;
Energy saving up to 33%;
Data memory when power is off;
Display
Large, touchscreen display;
European standard installation box;
White lighted display for easier low-light viewing;
5+2 or 6+1 or 7 days six periods program schedules maximize comfort
and economy;
Intuitive menu-driven set-up, programming and operation,
Permanent program retention during power loss;
Setpoint temperature limited range capable;
Enhanced touchscreen security prevents tampering.
Can switch upto 16 amps (230v)
Temperature display resolution: 0.5 C;
A / AF/ F models all in one
Combination of 3 models;
A - Air only, with built-in sensor;
F - Floor only,controls floor temperature;
AF - Controls air temperature with ability to limit the
floor temperature
Specifications
| Power supply | 230VAC (120VAC optional) |
| Inputs | 2 x NTC10K temperature sensors |
| Output | 1 x switch relay(R1),max 3500watts |
| Ambient temperature | 0 °C [+32 °F] ~ +45 °C [+113 °F] |
| Operating RH | 0~95% (non condensing) |
| Dimensions | 86mm x 86mm x14mm |
| Backlight life | 5,000 hours |
Useful settings
Vacation mode(frost protection mode)
Switching differential setting
Floor temperature limit
Packing details
1pc/inner box, 50pcs/carton
Carton size: 51x22x36cm
Dimension:mm
Installation Advice
All thermostat installations should be carried out by a fully
qualified electrician.
To avoid electrical shock and to prevent damage to the
thermostat,disconnect the power supply before beginning work.
Electrical wiring regulations prohibit the thermostats from being
installed in bathrooms;if using the thermostat in a
bathroom,install the thermostat on an internal wall outside the
bathroom as close to matting power supply cables as possible.
