Home Companies Nanjing Saiko Controls Co.Ltd

Floor Heating HVAC Programmable Radiator Thermostat With Digital Temperature Controller

Active Member

Contact Us

[China]

Address: No.40 Ailing Road, Moling Street, Jiangning District, Nanjing

Contact name:James Zhang

Nanjing Saiko Controls Co.Ltd

Floor Heating HVAC Programmable Radiator Thermostat With Digital Temperature Controller

Country/Region	china
City & Province	nanjing jiangsu
Categories	Bricks

Product Details

Floor Heating HVAC Programmable Radiator Thermostat With Digital Temperature Controller

Weekly circulation, it is possible to set 6 periods called events each day with different temperatures, also you can select "manual mode" or "temporary control mode" according to your individual requirements. The thermostat is recommended for the control of electric heating devices or on/off valve actuator used in water-based heating systems.

Features

Switches on your heating system at predetermined times on different days of the work.
Comes with a preprogrammed schedule that is suitable for most installations. However, you can customize this program any time you wish.
Allows you to reset the thermostat to factory settings.
Changes the start time of a heating period automatically so that the desired temperature is reached at the time that you set.
Controls the temperature of the floor through a temperature sensor that is placed in the floor construction.

Technical data

Power Supply	AC200-240VAC 50/60HZ
Accuracy	±0.5ºC
Probe sensor	NTC Sensor
Power Consumption	<1W
Load current	3A(water heating),16A(electric heating)
Temperature Adjustable Range	5°C~90°C( can adjust to 35°C~90°C)
Limit Temperature Range	5°C~60°C( factory setting: 35°C)
Output	Switch relay
Insulating condition	Normal environment
Running program	Set per 1 week as a cycle
Installation	Wall mounted
Application	Water Floor Heating System
	Electric Floor Heating System
	Infrared Heater System
Certificate	CE,RoHS

Advanced setting (qualified person preferred)
When the thermostat is turned off, You can press"Menu" and turn on it at the same time ,then you can enter the mode of advanced setting.

Symbol		Setting	Up or Down
1	ADJ	Temperature calibration	Adjust measured temperature
2	SEN	Sensor mode	IN: built-in sensor OUT: floor sensor ALL: both sensors
3.	LIT	Limitation temperature	Adjust limitation value, Limitation range:5℃~60℃
4	DIF	Switching differential	Adjust switching differential
5	LTP	Antifreeze function	Turn on/off Anti-frozen function
6	PRG	Set vacation mode	00: 5/2 day mode 01: 6/1 day mode 02: 7 day mode
7	RLE	Potential- free output and main power output in the same/different way	Change the present linkage way
8	DLY	Delay time of Potential- free output	Change linkage delay time
9	HIT	Max temperature	Limitation temperature setpoint
	AFAC	Reset to factory settings	Press""and hold for 5s,all parameters will be reset