Results forheat resistance test apparatusfrom 103717 Products.
|
|
Water Evaporation Device Brief Introduction applied to not resulting in excessively high temperature in temperature-rise test of refrigerator and freezer during defrosting system ...
|
|
|
|
|
Constant Temperature Water Bath Product information: This device meets the test equipment requirements of GB5013 and UL1581 etc. And mating usage of other devices, it can be used ...
|
|
|
|
|
IEC 60950-1 clause 2.10.8.4 Automatic Abrasion Resistance Tester / Printed Circuit Abrasion Strength Device Application: The device is used to check abrasion strength of printed ...
|
|
|
|
|
Requirements and test methods for determination of the jetting resistance of components of drains and sewers Ceramic Nozzle-DIN 19523:2008 Figure 1 DIN 19523:2008 Pressure: 15 Mpa ...
|
|
|
|
|
ISO 80601-2-70 figure 21.101 standard resistance Key D is the internal diameter: (4 ± 0,1) mm L is the length: (40 ± 1) mm A is the angle (45 ± 1) ° Break all edges with 0,15 mm to ...
|
|
|
|
|
ISO 80369-7 Fig C.3 — Female reference connector for testing female luer lock connector for separation from axial load and resistance to overriding ISO 80369-7 FIGURE C.1 and C.3 ...
|
|
|
|
|
Unsymmetrical coupled decoupling networkDATA-CDN-4B mVoltage wave :1.2/50 s open circuit with 10/700μs( waveform generator output) Maximum voltage tested :6 kV Matching Resistance ...
|
|
|
|
|
ISO 80369 - 3 2016 Small bore connector for liquids and gases in healthcare application - Part 3 Figure C.4 – Male reference CONNECTOR for testing female ENTERAL CONNECTOR for ...
|
|
|
|
|
ISO/DIS 18193:2020- Cardiovascular implants and artificial organs — Cannulae for extracorporeal circulation ISO/DIS 18193:2020-Figure A.11 — Female reference conical fitting for ...
|
|
|
|
|
Zr-1200model mask resistance tester Product introduction Zr-1200 mask resistance tester conforms to yy0469-2011 technical requirements for surgical masks.When different airflow ...
|
|
|
|
|
ZR-1200model mask resistance tester Product introduction Zr-1200 mask resistance tester conforms to yy0469-2011 technical requirements for surgical masks.When different airflow ...
|
|
|
|
|
ZR-1210model respirator resistance detector Product introduction Zr-1210 respirator resistance tester is used to measure the inspiratory and expiratory resistance of the mask under ...
|
|
|
|
|
Lamps and Lanterns Adjusting Devices Product information: The device is used to detect adjustment device, and confirm to the IEC60598-1 clause 4.14.3. The adjustment device, ...
|
|
|
|
|
ISO 9360-1 Anaesthetic and respiratory equipment –Heat and moisture exchangers (HMEs) for humidifying respired gases in humans –Part 1: HMEs for use with minimum tidal volumes of ...
|
|
|
|
|
Microwave Oven Door Endurance Tester Product information: The microwave oven door endurance tester is designed and manufactured according to IEC60335-2-25. It is a dedicated tester ...
|
|
|
|
|
Discharge Network Suite Optional according to different standards: Discharge capacitance :100 pF,150pF,200pF,250pF,300pF 400pF,500pF Discharge resistance :Ω,100Ω,150Ω,200Ω,300Ω,330...
|
|
|
|
|
Discharge Network Suite Optional according to different standards: Discharge capacitance :100 pF,150pF,200pF,250pF,300pF 400pF,500pF Discharge resistance :Ω,100Ω,150Ω,200Ω,300Ω,330...
|
|
|
|
|
Description & Features These Gauges are necessary to check LUER and LUER-Lock Systems regarding the measuring, leakage, ease of assembly, separation force and unscrewing torque as ...
|
|
|
|
|
10mΩ Battery Short Tester, IEC 60335-1-Annex B Standard It is conforms to IEC 60335-1-Annex B (Shorting means with a resistance not to exceed 10 mΩ ± 2 mΩ) 1. Temperature ...
|
|
|
|
|
IEC 60335-1 Resistive-capacitive low pass filter with a -3 dB roll off frequency of 5 kHz ± 0,5 kHz
|
|
|
You may also be interested in :
