|
[China]
Trade Verify
Address: 301RM, Digital Core Valley, No.15, Houshan Rd,Wuxi City, 214104
Contact name:Li.C
Jiangyin M&C Heat Parts Co.,Ltd |
|
Verified Suppliers
|
|
|
Seawater Heat Exchanger Sondex S100 Plate Heat Exchanger Gasket and
Plate for Marine Oil Cooler
S100 Plate Heat Exchanger Construction
| Frame | Plates | Gaskets |
|
|
|
S100 Model Plate Heat Exchanger Specification
| Surface Area | 1.0㎡ |
| Plate Theta Angle | 61 ° 121 ° |
| Connection Diameter | 202 mm |
| Plate Corrugate Thickness | 2.6 mm |
| Plate Centre Length* Width | 1489 * 395 mm |
| Plate Shape Length*Width | 1756 * 656 mm |
| Gasket Type | Sonderlock type and Glue Type |
S100 Plate Heat Exchanger Technical Information
| Frame |
|
| Design Pressure |
|
| Intermediate Frames |
|
| Connections |
|
| Plate Material |
|
| Gaskets |
|
| Extra Equipment |
|
S100 Plate Heat Exchanger Gasket & Plate Pictures
S100 Frames
| Number of Plates | L(frame length)(mm) | W(mm) | H(mm) | Weigth max,empty(kg) | Connection type |
| S100 IS16 | |||||
| 7-64 | 667 | 770(30.31") | 2198(86.53") | 1805 | DN 200 flange or 8" |
| 65-137 | 1067 | 2194 | |||
| 138-191 | 1367 | 2489 | |||
| 192-228 | 1567 | 2689 | |||
| 229-319 | 2067 | 3188 | |||
| 320-410 | 2567 | 3692 | |||
| 411-500 | 3067 | 4193 | |||
| 501-682 | 4067 | 5204 | |||
| 683-864 | 5210 | 790(31.10”) | 2505.5(98.64") | 6214 | |
| 865-1046 | 6210 | 7267 | |||
| S100 IS25 | |||||
| 7-61 | 677 | 790(31.10") | 2200.5(86.63") | 2019 | DN 200 flange or 8" |
| 62-133 | 1077 | 2505 | |||
| 134-186 | 1377 | 2864 | |||
| 187-222 | 1577 | 3108 | |||
| 223-311 | 2077 | 3710 | |||
| 312-400 | 2577 | 4312 | |||
| 401-490 | 3077 | 4921 | |||
| 491-668 | 4077 | 6125 | |||
| 669-847 | 5220 | 790(31.10") | 2505.5(98.64") | 7686 | |
| 848-1025 | 6220 | 8944 | |||
PHE Plate Feature
| FEATURE | ADVANTAGES | WHAT'S IN IT FOR YOU! | |
| A | DISTRIBUTION AREA | Efficient Flow Distribution |
|
| B | CORRUGATED PLATE PATTERN-HEAT TRANSFER AREA | Promotes Turbulence, Minimize Fouling |
|
| C | PLATE LOCKING SYSTEMS | "Corner lock" and " bubble lock" concepts ensure a stable and well aligned plate pack when the unit is closed |
|
| D | EASYCLIP GASKET SYSTEM | Bevelled gasket edges easily clip into place using your flingers Stays securely in place and provides high sealing integrity |
|
PHE Gasket Type
Please check their are three common model gasket type are aways used in Sondex brand.
S100 Plate Heat Exchanger in Marine Cooling System
Most Cooling systems are made as central cooling systems, which means that there is only one or two bigger plate heat exchangers equipped with titanium plates.
Titanium is the only material that can withstand the aggressive seawater without corrosion damages on the plates in the heat exchanger. This means that the central cooler can operate without problems using seawater as the cooling media for the internal freshwater cooling system.
The advantage of a central cooler is that the use of the corrosive seawater is limited to one or two plate heat exchangers, and thereby the use of exotic material for the plate heat exchanger and the seawater pipeline is limted to a minimum, which will reduce the corrosion damage in the cooling system.
The rest of the plate heat exchangers is normally equipped with stainless steel plates there is no corrosion risk as the heat exchangers work with freshwater.
| 1. Main Engine | 2.Auxiliary Engine | 3. Heat exchanger for Central Heating | 4. Freshwater Generator |
| 5. Central Cooler | 6. Gear Oil Cooler | 7. Lubricating Oil Cooler, Auxiliary Engine | 8. Lubricating Oil Cooler, Main Engine |
| 9. Seawater Filter | 10. Seawater Pump | 11. Freshwater Pump |
PHE Problem Solving
If you have problems with your plate type heat exchanger, in most cases these can be solved by your own personnel. Please find below a summary of possible problems as well as possible causes and solutions.
A condition for the continuous proper functioning of your plate type heat exchanger is in strict compliance with the permissible values for pressure and temperature mentioned on the name plate.
Exceeding these values, even as a short-lasting pressure peaks will cause damage to the unit and be the cause of problems.
To avoid costly repairs, we advise you to have the installation work and maintenance carried out by properly trained personnel. You can also contact us.
| Problem | Possible Cause | Possible Solution |
| Leakage | At the connections |
|
| Mixing of primary and secondary circuit |
| |
| In plate package |
| |
| The operating Conditions deviate from the specification |
| |
| Insufficient Capacity | Air in the system |
|
| The operating conditions deviate from the specification |
| |
| The heat exchanger is dirty |
| |
| The connections have been interchanged |
| |
| Too high pressure drop | Flow large the design flow |
|
| Channels in plate(s) blocked |
| |
| Incorrect measurements |
| |
| Medium deviating from the design |
| |
| Air in the system |
|
Plate Heat Exchanger Pictures
M&C Heat Parts Company Profile
M&C Heat Parts Co., Ltd is founded in Wuxi, Jiangsu. M&C is specialized in designing and manufacturing high quality heat transfer equipment. The range of products comprises plates & gaskets, plate heat exchangers, gasketed heat exchangers and brazed heat exchangers. Thus, as one of the few producers worldwide, M&C offers solutions with optimum thermodynamic designs for different industries and virtually all applications.
M&C provide you with one-stop accessories service, multuple-brand & multiple model alternatives for your choice. We'll meet all your requirements of plate heat exchanger and keep your machine running contunously through our rich storage and quick response.
Moreover, we have a strict quality control and after-sales service system, from material purchasing to finished product package until the product received in good condition. Our products have been widely used all over the world in various fields.
M&C Plate Heat Exchanger Plates & Gaskets Other Models Recommend
Sondex/Danfoss - S4A, S7, S20, S21, S22, S41, S43, S47, S65, S81, S86, S100, S120, S130, SFD7, SFD13, SW19 and so on;
APV/SPX - H17, N25, N35, A055, A085, J060, J092, J107, M92, M107, K55, K71, B110, B134, P105, P190, SR1, SR2, TR9GN, TR9AL and so on;
Tranter/Swep - GX12, GL13, GC26, GC51, GX26, GX51, GX42, GX64, GX85, GX91, GX140, GX145 and so on;
API/Schmidt - Sigma 7, Sigma 9, Sigma 13, Sigma 26, Sigma 27, Sigma 36, Sigma 66, Sigma 106, Sigma 229, Sigma Star 45, Sigma Star 90 and so on;
Vicarb - V4, V13, V20, V28, V45, V60, V100, V110, V130 and so on;
Hisaka - EX11, EX15, EX15, LX026, LX195, LX395, LX595, RX135, RX395, RX595, UX115, UX225, UX395, UX495, UX815, UX995 and so on;
GEA - VT04, VT10, VT20, VT40, VT80, VT405, VT805, VT1306, NT50M, NT50X, NT100S, NT150S, NT150L, NT250M, NT250L and so on;
Funke - FP04, FP05, FP14, FP16, FP08, FP22, FP31, FP40, FP41, FP70, FP100, FP120 and so on;
Thermowave - TL200SS/PP, TL250SS/PP, TL400SS/PP. TL650SS/PP and so on;
DHP - DX143, DX146, DX20V, DX20DL, DX20DM, DX30S, DX36M and so on;
LHE - HT101, HT102, HT104, HT151, HT152, HT202, HT232, HT233 and so on;
M&C Plate Heat Exchanger Goods ready to Delivery
