Sealing Groove Gaskets , GC60 Gaskets Corrugation Pressing Metal Sheet

Sealing Groove Gaskets , GC60 Gaskets Corrugation Pressing Metal Sheet

Product Introduction

Basic information

Each plate contains two parts:

Metal plate--- It is an important heat transfer element for pressing metal sheet with corrugation, sealing groove and corner hole.

Corrugated not only can strengthen heat transfer, and can increase the sheet and rigid, so as to improve the bearing capacity of the plate heat exchanger, and because turbulence prompted the liquid state, so it can reduce the formation of sediment or dirt, play a role in “self-cleaning”.

Sealing gasket--- Installed in the slots along the perimeter of the plate of the gasket and seal plate between the peripheral, prevent fluid leak outward, and according to the requirements of design, the sealing part of the Angle of hole, the cold and hot liquids according to their respective port flow.

Material: Stainless steel 304, Stainless steel 316L, Titanium

Advantage: Produce plastic deformation and have certain strength

Heat Exchanger Applications

1. Refrigeration: used for condenser and evaporator.

2. The hvac: cooperate with boiler, high-rise building intermediate heat exchanger used in the middle of the heat exchanger, etc.

3. chemical industry: soda ash industry, synthetic ammonia, alcohol fermentation, resin synthesis of cooling, etc.

4. Metallurgical industry: aluminate liquor heating or cooling, steelmaking process cooling, etc.

5. Machinery industry: all kinds of quenching liquid cooling, reducer lubricating oil cooling, etc.

6. The electric power industry: high voltage transformer oil cooling, oil cooling generator bearing, etc.

7. Paper industry: bleaching process heat recovery, heating wash slurry, etc.

8. Textile industry: viscose rayon aqueous alkali cooling, boiling nitrocellulose cooling, etc.

9. The food industry: juice sterilization cooling, animal and plant oil heating or cooling.

10. Grease technology: soap base ambient pressure, heating or cooling of various process with liquid.

11. The central heating: thermal power plant waste heat district heating, heat the bath water.

12. Other: petroleum, medicine, shipbuilding, desalination, and geothermal.

PHE Gasket and Plate Material

Product Display