Shenzhen Realrun Electronic Co., Ltd. |
|
Straight Shrouded Pin Header Connector Dual Row Short Latch 2.54mm 20 Pin
Current Rating | 3AMP |
Contact Resistance | 20mΩ Max |
Withstand Voltage | 500V AC/DC |
Insulation Resistance | 1000mΩ Min |
Operation Temperature | -40℃ to +105℃ |
Contact Material | Brass |
Contact Plating | Au or Sn over Ni |
Insulator Material | LCP +30%GF( UL94V-0 ) |
Product name: Shrouded Header Connector | ||
1. Product features: high temperature resistant to high voltage electrical conductivity | ||
2. Product material: PA9T/LCP/PBT, plating surface treatment: gold-plated or tin plating | ||
3. Scope of application: Mainly suitable for data communication and electronic equipment and welding on the PCB board, connected to the corresponding specification of IDC ribbon cable and the other circuit designers need to circuit. And if current usually transmission control signal |
How to use shrouded header connector
Ejector header connector usually needs to pay attention to the
insertion direction, perpendicular to the insertion direction and
inclination.
1. Insertion direction: when the connector is fully inserted to u =
14.2, the specified contact resistance shall be ensured.
2. Perpendicular to the insertion direction: if the printed board
or fixed board mounted connector is floating mounted, the design of
free and fixed board mounted connector shall provide at least 1mm
adjustable displacement.
3. Inclination: the design of free and fixed plate mounted
connectors allows inclination error, which is ± 4 ° in longitudinal
direction and ± 4 ° in transverse direction.
FAQ
Q: Can I get some samples?
A: Yes,some samples are free.
Q. which payment can be accepted:
A: 1. The payment terms can be flexiable depend on the quantity and
products.
2. Usually, new customer we prefer the 100% T/T before shipping or
30%T/T advance before shipping.
Q: Are you manufacture of trading company?
A: We are a manufacture in Shenzhen, China.
Q: What’s the delivery time?
A: It usually takes about 3~7 workdays to produce the
products.
Q: How can we get a quote?
A: Please offer the specification of the product, such as part No.
, quantity, drawing, etc.