Active Member
|
[China]
Address: 602,Building A, Wenhao Commercial Building, No. 4315,Bao'an Avenue, Bao'an District
Contact name:Cathy wong
Shenzhen Yunding Communication Electronics Co.,Ltd |
|
|
High Gain 5dBi 3G Network Antenna / Long Range Antenna With 3 meter cable
| Electrical characteristics and Mechanical | |
| Frequency Range | 800-2100Mhz/custom |
| Gain | 5DBI |
| Input Impendance | 50 ohm |
| Connector | SMA / or others |
| Cable length | Custom |
| Environment | |
| Working Humidity | 20~80% |
| Maximum Input Impedance | 50W |
| Working Temperature | -40ºC~+85ºC |
Antenna - S Parameter Test Data
| Test Items | Requirements | No.1 | No.2 | No.3 | No.4 | No.5 | |
| C1 | S.W.R | TBD | ok | ok | ok | ok | ok |
| C2 | Insertion Loss | TBD | ok | ok | ok | ok | ok |
| C3 | Voltage Breakdown | > 500V | > 500 | > 500 | > 500 | > 500 | > 500 |
| C4 | Insulation Resistance | > 500 Mohm | > 500 | > 500 | > 500 | > 500 | > 500 |
| M4 | Pull Force | Spec | ok | ok | ok | ok | ok |
| M6 | Dimension | drawing | ok | ok | ok | ok | ok |
Characteristics and Reliability Test
| Test Items | Test Condition and Procedure | Requirements | |
| C1 | S.W.R. | Set DUT on Network Analyzer; make individual calibration to test | Directive DUT specification |
| M1 | Vibration | MIL-STD-202G, 201A Amplitude: 0.03 inch (0.76mm); Freq: 10 to 55 Hz 3 directions; 2 hours for each direction | 1. No Visual Damage 2. Frequency Tol.<= 5% |
| M2 | Random Drop | Height: 1.5 Meter; 3 directions; 1 time for each direction | 1. No parts separated 2. Frequency Tol.<= 5% |
| M3 | Solderability | MIL-STD-202G, 210F, cond. A Solder iron: 350±10°C; Duration: 5 seconds | 1. Mounted on PCB 2. No Visual Damage |
| M4 | Terminal- Pull Test | MIL-STD-202G, 211A, cond. A Holding with individual specification; force applied to axis of terminal | 1. Directive DUT specification 2. Frequency Tol.<= 5% |
| M5 | Dimension | Inspection of dimension, color, material, package, surface process | Directive DUT specification |
| E1 | Salt Spray | MIL-STD-202G, 101E, cond. B Temp: 35°C; RH: >= 95%; NaCl solution: >= 5%; Time: 48 hours | After 2 Hours Recovery 1. No Visual Damage 2. Frequency Tol.<= 5% |
| E2 | Humidity | MIL-STD-202G, 103B, cond. B Temp: 40°C; RH: >= 95%; Time: 48 hours | After 2 Hours Recovery 1. No Visual Damage 2. Frequency Tol.<= 5% |
| E3 | Thermal Shock | 1 Cycle: - 40°C (30 minutes) to + 80°C (30 minutes) Cycles: 24 | After 2 Hours Recovery 1. No Visual Damage 2. Frequency Tol.<= 5% |
| E4 | Life (High Temp.) | MIL-STD-202G, 108A, cond. A Temp: 85°C; Time: 96 hours | After 2 Hours Recovery 1. No Visual Damage 2. Frequency Tol.<= 5% |
Features:
1. it have several type :2dbi,3dbi,5dbi,7dbi,9dbi...
2. the connector can be F,SMA ,MCX.IPEX...
3. The antenna can be customized be GSM ,GPRS,LTE,WIFI ...
