Active Member
|
[China]
Address: Nanfeng town Yongfeng village Zhangjiagang city Jiangsu province China
Contact name:Sweety Tang
Xinting Machinery Co., Ltd. |
|
|
Grinding PE PP TPU PVC plastic pulverizer machine cost for Hard Soft materials into 20-80 mesh powders
Application:plastics grinder
Widely used for PVC pipe, PVC profile and PVC sheet ,PE PP TPU and so on
Advantages plastics grinder
1, It adopts water circulation and wind cooling, which is suitable for the processing of heat-sensitive material.
2,As the high rotation of spindle and fixed blades, the feeding material was crushed into powders
3,The blades are made of wear-resistant steel, which owns long working life
4,The machine is compact, which can be maintained by opening the cover.
5,Simple adjustment of cutting gap through the gasket of the spindle nut
6,It is equipped with air feeding device to ensure uniform cooling and fast cooling.
7,It is fully sealed to prevent form dust leakage
Machine features
1.With water cycle and wind cooling,the machine can be applied into processing heat sensitive material.
2.With the tail-wagging air stream(partly eddy flow)produced by the tail-wagging of the main shaft capstan of the machine(without sieving).
3.Both the board and the cutting blade are made of abrasion-resistant steel,with excellent performance after heat treatment.
4.With severeness of framework,the volume of the machine is quite small.If you open door closure,you can maintain it.It is completely airproof and without any dust leakage.
5.With winding reclaiming equipment,the machine is features by cooling materials evenly,quick cooling and some other characteristics.
Technical Parameters
| Type | SMP-500 | SMP-600 | SMP-800 |
| Chamber`s inner diameter(mm) | 500mm | 600mm | 800mm |
| Rotator`s quantity | 1set | 1set | 1set |
| Speed of main shaft (RMP) | 3700rpm | 3500rpm | 3200rpm |
| Main power(KW) | 37 KW | 55 KW | 75 KW |
| Capacity(kg/h) | 200-250Kg/h | 250-400 | 400-600 |
| Fineness(mesh) | 15-120mesh | 15-120mesh | 15-120mesh |
| Weight(kg) | 1200Kg | 1650Kg | 2800Kg |
| Quotation | USD9500 | USD10000 | USD11000 |
| Dimension(mm) | 5900×1450×2900mm | 6200×1550×3100mm | 6500×1650×3300mm |
| Power supply | 380V 50Hz | ||
Application :
1. With water cycle and wind cooling,the machine can be applied
into processing heat sensitive material.
2. With the tail-wagging air stream(partly eddy flow)produced by
the tail-wagging of the main shaft capstan
of the machine(without sieving).
3. Both the board and the cutting blade are made of
abrasion-resistant steel,with excellent performance after heat
treatment.
4. With severeness of framework,the volume of the machine is quite
small.If you open door closure,you can maintain it.It is completely
air Proof and without any dust leakage.
5. With winding reclaiming equipment,the machine is features by
cooling materials evenly,quick cooling and
some other characteristics.
Pre-Sales Service
* We given client the details technician offer.
* Professional advice for Inquiry and technical support.
* supply the details layout, installation instruction, technician
support for the clients.
* View our Factory,sales manager accompany.
* 24 hours English support.
After-Sales Service
* We arrange engineer to install the machinery and training the
workers for client abroad if clients required.
* We have 24 hours team to solve problems after sales.
* We have free spare parts with the right machine during warranty
time.
* We supply whole machine lifetime spare parts for every customer
with low cost after warranty time.
* We always up date the new technology to every customer.
