Active Member
|
[China]
Address: Room 702-3,Ningbo Lishi Commercial building,Lane 578,45# Tiantong South Road,Yinzhou District,Ningbo,China
Contact name:Tina Kui
VAINO INTERNATIONAL LIMITED |
|
|
servo system extrusion blow molding machine max production capacity 60L for toys
Brief introduction
MP90 is the bigger model than MP85 in accumulator head which can produce container from 10L-30L .
with parison thickness control,robot take-out mechanism installed.
Machine specification:
| Max container capacity | L | 60 |
| Number of die | set | 1 |
| Machine Dimension(L×W×H) | M | 5*2.8*4 |
| Total weight | ton | 15 |
| Clamping force | kn | 350 |
| Platen opening stroks | mm | 450-1050 |
| Stroke of mould board | mm | 600 |
| Max mould size(W×H) | mm | 720*1200 |
| Screw diameter | mm | 90 |
| Screw L/D ratio | L/D | 24 |
| Plasticising capacity | kg/h | 140 |
| Number of heating zone | zone | 4 |
| Extruder heating power | kw | 24 |
| Power of screw-bar machine | kw | 0.5 |
| Extruder driving power | kw | 45 |
| Hopper capacity | L | 7 |
| Number of heating zone | zone | 4 |
| Power of die heating | kw | 20 |
| Max die-pin diameter | mm | 350 |
| General power of machine | kw | 113 |
| Power of the electric motor of oil pump | kw | 22 |
| Air pressure | Mpa | 1 |
| Average energy consumption | kw | 53 |
| Using quantity of compression air | m3/min | 1.8 |
| Using quantity of cooling water | L/min | 40 |
